Printable Version of Topic
Click here to view this topic in its original format
914World.com _ 914World Garage _ FS 914 Steering Wheel
Posted by: Tomgayer Feb 14 2018, 01:19 PM
i posted a wheel and horn bar for sale on Ebay for 10 days. 12 photos.
I have a 914 shifter complete also that i need to pull and post. I am going
with a cable shift for my tailshift 901. If this is in the wrong place please
move to correct. I am not too computer savvy.
Posted by: mepstein Feb 14 2018, 01:26 PM
Posted by: burton73 Feb 14 2018, 01:47 PM
i posted a wheel and horn bar for sale on Ebay for 10 days. 12 photos.
I have a 914 shifter complete also that i need to pull and post. I am going
with a cable shift for my tailshift 901. If this is in the wrong place please
move to correct. I am not too computer savvy.
Yo’ Bossier City Tom,
Tell us about your tail shift with a Cable Shift. Who is making the Cable Shift?
Welcome the World.
Bob B
Posted by: Tomgayer Feb 15 2018, 10:39 PM
I am making the cable shift. I am using two cables from McMaster Carr, some Heim joints form Home Depot special order and a shifter from UAPI pick and pull yard. I will have about $250 in the completed project and will post all details here when i finish. I pulled a 302 from my Cobra today and after i bolt it to the 901 with the KEP adapter plate I will be able to finish the cables. When you are a lone wolf, it takes a whole lot more time to finish projects than the guys on the Velocity channel.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)