Printable Version of Topic

Click here to view this topic in its original format

914World.com _ 914World Garage _ door pillar sealing

Posted by: JFG Feb 15 2018, 01:05 PM

I put the lower dash pad on tonight and put all the underside screws in but left the side screws out for now.

I now have a gap in the door pillar edge seal. How far up does the edge seal go for a proper seal/fit?

Posted by: JFG Feb 16 2018, 01:23 AM

Posted by: ndfrigi Feb 16 2018, 01:55 AM

just helping for the orientation of your picture

Attached Image

Posted by: mgphoto Feb 16 2018, 08:10 AM

QUOTE(ndfrigi @ Feb 15 2018, 11:55 PM)

just helping for the orientation of your picture

Attached Image

The welting is not a seal, it just covers the welded seam, around the door opening.
It goes from the rear window door seal on the targa bar to the front seal of the small triangle window on the door , there should be no gaps.
That seams to be about 12 inches short

Posted by: Mikey914 Feb 16 2018, 12:54 PM

That seal is way too short.

Posted by: gothspeed Feb 16 2018, 03:34 PM

Both seals (upper and lower) should meet at about the red line in this pic VVV

Attached image(s)