Printable Version of Topic

Click here to view this topic in its original format

914World.com _ 914World Garage _ front sway bar bushing

Posted by: cuddyk Feb 19 2018, 09:06 PM

Hi Guys,

I'm finally in the home stretch of my front end winter projects. Lots of videos coming soon.

Seems the rubber sway bar bushing is sitting proud of the back edge of the mount. The front ridge is just over the front opening, which appears to be as designed. Does the rear just get compressed when everything gets bolted up...or should I be looking for a different, shorter bushing?

Attached Image

Posted by: toolguy Feb 19 2018, 09:24 PM

You are correct. . it will compress and form a tight solid fit on the sway bar when the mounting bolts are tightened . Use some rubber lube, dish soap etc and it will easily all slide together in the proper place.

Posted by: cuddyk Feb 19 2018, 09:33 PM

thanks man.