Printable Version of Topic

Click here to view this topic in its original format

914World.com _ 914World Garage _ Coil wires

Posted by: simonjb Mar 2 2018, 03:52 PM

Just want to make sure I have all this connected correctly

Red from Distributor to Coil +
Black from Distributor to Coil -

Black with Purple (blue connector) to Coil -
Black with Red (red connector) to Coil +

Green wire you see unconnected to Temp sender
White wire you see not connected - not used as running carbs

Attached Image

Posted by: simonjb Mar 3 2018, 01:08 PM

bump

Posted by: jcd914 Mar 4 2018, 03:04 AM

QUOTE(simonjb @ Mar 2 2018, 01:52 PM)

Black with Purple (blue connector) to Coil -
Black with Red (red connector) to Coil +

These are the stock wires to the coil and you have them correct.

The others are for an aftermarket ignition module and I don't know if they are correct or not.
It depends on the module and how it is supposed to be wired.
If I had nothing but the wire colors to go by I would wire it like it is.
But I would first try to find out what module I had and research how that module should be wired.

Electrical items are lousy things to guess about.

Jim