Printable Version of Topic

Click here to view this topic in its original format

914World.com _ 914World Garage _ decklid trim

Posted by: JFG Mar 3 2018, 07:24 AM

Can someone advise where to fit the trim on the decklid grills?

I have replacement from 914 rubber but dont know where it fits. Or whether it fits the grills before fitting to the decklid or after.

Posted by: JFG Mar 3 2018, 07:25 AM

Posted by: JFG Mar 3 2018, 07:37 AM

Welting

Posted by: JFG Mar 3 2018, 07:37 AM

Edging

Posted by: dr914@autoatlanta.com Mar 3 2018, 09:16 AM

welting in-between grilles and engine lid (painted part) edging on the edge of the engine lid back bottom and two sides

Posted by: Mikey914 Mar 3 2018, 10:45 AM

The welting has the J hook to go under the edge of the metal. The sides are a little more tricky as you will have to trim a little. On the side that is not secured down directly I use a dab of contact cement to secure. I also cut the notch from the bottom of the welting to relive the pin areas.
Hope this helps,
And thanks for your business,
Mark

Attached image(s)

Posted by: Mikey914 Mar 3 2018, 10:48 AM

Also the protector will slide onto the bottom lip once the grill is assembled. While the factory didn't do the sides I included the material to do them as it looked like it was missing

Attached image(s)

Posted by: JFG Mar 3 2018, 11:18 AM

Superb advice thanks both.

Now i ineed to stop the trunk crushing up against the side piece grill edge.

Posted by: Mikey914 Mar 3 2018, 11:24 AM

Is this what you need?

https://shop.914rubber.com/Rubber-bumper-to-keep-trunk-from-hitting-deck-lid-Early-deck-lid-bumper.htm?categoryId=-1

Sorry the metal is not included just the bumper

Attached thumbnail(s)

Posted by: JFG Mar 3 2018, 11:43 AM

Looks like i also need 12 13 & 14. I was making a list to order this week.

Not sure where that stop bracket is meant to fit but it looks like i'll need to add those aswell

Posted by: JFG Mar 3 2018, 11:44 AM

Looks like i also need 12 13 & 14. I was making a list to order this week.

Not sure where that stop bracket is meant to fit but it looks like i'll need to add those aswell

Posted by: JFG Mar 3 2018, 11:45 AM

Don't know why it's showing sideways

Posted by: Mikey914 Mar 3 2018, 12:11 PM

As the website is not as easy to search
13
https://shop.914rubber.com/Rubber-hood-bumper-99970303650-4-required-per-car-99970303650.htm?categoryId=-1

14

https://shop.914rubber.com/Engine-Deck-Lid-Bumper-Set-91455925310-91455925310.htm?categoryId=-1

12 I need to identify. we have the speednuts and washers, think it's a washer we have

Attached thumbnail(s)

Posted by: JFG Mar 4 2018, 03:06 AM

QUOTE(Mikey914 @ Mar 3 2018, 05:24 PM)

Is this what you need?

https://shop.914rubber.com/Rubber-bumper-to-keep-trunk-from-hitting-deck-lid-Early-deck-lid-bumper.htm?categoryId=-1

Sorry the metal is not included just the bumper

I assume there are 2 of these fitted. Can someone put up a picture of where they're in the trunk hinge area?

Posted by: Mikey914 Mar 4 2018, 03:53 AM

QUOTE(JFG @ Mar 4 2018, 01:06 AM)

QUOTE(Mikey914 @ Mar 3 2018, 05:24 PM)

Is this what you need?

https://shop.914rubber.com/Rubber-bumper-to-keep-trunk-from-hitting-deck-lid-Early-deck-lid-bumper.htm?categoryId=-1

Sorry the metal is not included just the bumper

I assume there are 2 of these fitted. Can someone put up a picture of where they're in the trunk hinge area?

Picture from the website not the best, but I think you get the idea, they go in the "C" shape on the hinge bracket.

Attached thumbnail(s)

Posted by: JFG Mar 4 2018, 11:41 AM

That's the engine decklid hinges. I am referring to the bracket to stop the trunk hinges hitting the small grill sections above the battery and nearly above the relay board.

Posted by: JFG Mar 4 2018, 11:49 AM

That's the engine decklid hinges. I am referring to the bracket to stop the trunk hinges hitting the small grill sections above the battery and nearly above the relay board.