Saw the thread on the hounds tooth and said I'd do some up. These are really sharp. Think I may put in my red car.
Have a limited quantity already done up, but we can turn these in less than a week so it will allow backorder. These are a very nice option for the price, and not as hot as the vinyl in the summer too!
The camera on my phone has s difficult time focusing so I'll need to drop into a light booth, and get better pics, but you get the idea.
On sale now here -
https://shop.914rubber.com/914-seat-vinyl-kit-1-seat-Houndstooth-Red-yellow-blue-orange-914seatHT.htm?categoryId=-1
Attached thumbnail(s)
The yellow is hard to photograph, but it's VERY sharp too
Attached thumbnail(s)
Crap. Another thing to buy.
Why is it called hound's tooth?
Any chance that light blue/black might be available?
I'm good for a blue/black set of 2 if you add the item to your website. Thanks.
On the site now. I'll bring in the blue and start on them as soon as we have our 1st order. Will do up a few for stock.
Mark
On your 914Rubber site, you added at picture of the blue/black pattern but it is not one of the colors available in the selection field (still only white, red, yellow).
Orange a possibility?
Just added orange and blue to the options. Learned that if the stock quantity is 0 it will not display unless I override. I'll be bringing in material end of the week, so if you want these or other colors let me know I can do it all at once. I will also stock these once they are in. Just wasn't really sure what the distribution of these would be so I took a shot in the dark.
Thanks,
mark
Should be all fixed now -
https://shop.914rubber.com/914-seat-vinyl-kit-1-seat-Houndstooth-Red-yellow-blue-orange-914seatHT.htm?categoryId=-1
Thanks Mark. Yes Blue/Black is now listed. I ordered a set.
Excellent I will bring in material tomorrow and get these rolling.
THX
Mark - do you still have replacement foam cushions for sale. Thanks.
I fixed the link so it goes right to the listing now
https://shop.914rubber.com/914-seat-vinyl-kit-1-seat-Houndstooth-Red-yellow-blue-orange-914seatHT.htm?categoryId=-1
I have them listed as related items at the top.. the seat base bushings and seat adjuster handles are there too.
Let me add, thanks for some reason it was hidden. We also changed the foam to have a softer top section to compress for more comfort.
Still not seeing the replacement foam.
Anyone have a picture of a done red hounds tooth 914 seat?
Brown or tan?
If you want to buy a set I can make them. Want me to put up a listing for you. I can't see stocking them, but if you order I'll make. Not my personal favorite, but wouldn't go well in any of my cars either.
Attached image(s)
Mark, quick question, can you do black and white centres to suit a pre 71 seat set up ?
Yes and no.
The drivers yes. the passenger side no. But you mush have a camera in my shop as we just did the drivers and passengers in black and white hounds tooth. they are are a little more expensive in that you will need the "3 piece" back pad, that in your configuration is only 2, and we will need to credit the back bolster that would normally come with the seat. I can post some pics tomorrow.
The fixed back and bolsters are done. the "back pad" section we are sewing more up.
Attached thumbnail(s)
Mark,
What else is needed to complete a standard seat (‘72-‘76) with this houndstooth cover? I assume the bolster and back pieces? Foam as needed?
Thanks!!
All the kits assume that you have the sub components below the vinyl. The fixed base, and foam, as well as the backpad foam and fiberboard.
We do sell a foam replacement for the base. If you need a foam section I think we could cut one up, but I’ll have to figure out what we need to charge.
Mark
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)