Printable Version of Topic

Click here to view this topic in its original format

914World.com _ 914World Garage _ Jack point repair on 72

Posted by: Mikey914 Mar 15 2018, 05:58 PM

The car I bought in the desert is about as rust free as I've ever seen in the unrestored world. But the jack points were missing. Someone had bondo'ed over them and painted. I was scared as to what I would find, but dug into them. I found that heating it with a torch and pulling out with a screw driver worked well. I had hoped that as both were removed, it was not rust that caused them to be removed. This is what I found.


Attached thumbnail(s)
Attached Image

Posted by: Mikey914 Mar 15 2018, 06:00 PM

Looked mostly like surface rust, I had hoped that someone dorked up the jack point and decided to remove so that they would look the same, I think that's what happened as they looked good.


Attached thumbnail(s)
Attached Image Attached Image

Posted by: Mikey914 Mar 15 2018, 06:01 PM

Took it to Cary and he got me squared away pretty quickly.

Just got the pics in


Attached thumbnail(s)
Attached Image

Attached image(s)
Attached Image

Posted by: cary Mar 15 2018, 08:55 PM

Left side, start to finish.

Attached Image

Attached Image
Find the sweet spot to match up with rocker cover. As a final detail I line the rivet holes up so they don't have to be re-drilled.
I also trim the tube so that 7mm is outside the rocker panel.

Attached Image

Attached Image

Attached Image

Attached Image

Attached Image

Note : I do drill the drain holes on my cars. But not customer cars unless asked.

Posted by: n2j2ryan Mar 15 2018, 10:44 PM

Those look awesome. Great work. Makes me feel bad for deleting mine, but then again I live on an Island in the middle of a rain forest!

Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)