Contemplating replacing my seat belts for 944 units. From what I have read here, the pin in the back needs to be removed.
My question is; Will the standard late 914 receptacle work with the 944 belt or I also need to replace the receptacle for a matched 944 one?
TIA
Hi, the 944 belts are bolt in, no need to remove the pin on a 73 plus car.
As for the receiver, the rectangular hole 944 belt clip will insert properly in the 914 receptacle designed for a round hole. You will hear it click but the "Press" button will not fully go out.
I had this setup hold in a pretty severe front end collision and the belts did their job.
I would use the 944 receptacle to be 100% safe.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)