I am proceeding with plating of small parts, have found some pieces I do not recognize;
small 'stepped' spacer, may not have been zinc plated oem
The bolts are allen head
8mm , may not have been zinc plated oem
Thanks for any help.
Bottom Pic are the screws for the glove box door and the original finish on them is chrome.
Those 3 chrome ones in last photo are for glove box hinge
I believe the top left part in the first picture is a window stop that is located inside the door.
Jeff B
Thanks I remember the glove box chrome screws now.
The inner door window stop was in a bag of parts that came with a parts car, I've yet to rebuild the doors for my project.
Thanks
Top picture:
Clutch stop on pedal board
Tail shifter rod bracket
2nd picture
Bronze bushing for pedal assembly
steering column bolts for u bracket in front compartment
3rd picture
spare screws not stock
4th picture
Glove box screws
Thanks for the info.
This forum is great, depth of knowledge identifying 914 parts....
I know what every one of these is, they were not found in the bottom of an old bag under the seat of a rusty 914!
Really!
Thanks
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)