Printable Version of Topic

Click here to view this topic in its original format

914World.com _ 914World Garage _ Chick Magnet???

Posted by: CptTripps Jun 7 2005, 05:21 PM

Now, I've seen it all...

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1&item=4553742966

Evidently, it's a real 'chick magnet'

Posted by: "7" Jun 7 2005, 05:30 PM

QUOTE (CptTripps @ Jun 7 2005, 03:21 PM)
Now, I've seen it all...

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1&item=4553742966

Evidently, it's a real 'chick magnet'

Must be the "flames"....Paris would say: That's HOT.

Posted by: scruz914 Jun 7 2005, 05:34 PM

Not here in California.

Whatever it attracts, it looks like it would be fun to knock around in. What would it take to make it a 4X4? I think this was discussed in an earlier thread.

Posted by: ArtechnikA Jun 7 2005, 05:37 PM

what kind of drinks do you s'pose they serve at the toe bar ?

Posted by: Travis Neff Jun 7 2005, 05:38 PM

I thought I was a chick magnet, picture says it all..

Attached image(s)

Posted by: Cap'n Krusty Jun 7 2005, 05:42 PM

The absence of rear springs must make the ride "interesting"........................................... The Cap'n

Posted by: firstknight13 Jun 7 2005, 07:39 PM

MUST BE A MISPRINT SHOULD SAY "CHIMP MAGNET"!!!

Posted by: Headrage Jun 7 2005, 07:48 PM

I had a car just like that and all the baby chickens in the hood would come and "ROOST" in it... It was a "chick" magnet....

Posted by: airsix Jun 7 2005, 10:28 PM

Cool idea but obviously not built by and engineer. The front hoop is pre-bent for quick-folding-action in a rollover, and check out the outboard trailing-arm mounts. They are just hanging out there unsupported. Wouldn't take much to bend/break them IMHO. Cool idea though.
-Ben M.

Posted by: Midtowner Jun 7 2005, 10:34 PM

I saw one of these catch big time air over a steep hill in San Francisco in the 80's and unintentionally stacked into five parked cars during filming for a movie. Now that caught the attention of a few chicks!

Posted by: smooth_eddy Jun 7 2005, 10:50 PM

Sure looks easy to work on though! Nice access