Printable Version of Topic

Posted by: Geezer914 Apr 22 2018, 12:38 PM

1975 914. Does anyone know how to remove this knob or cable so I can insert it into the back of the speedometer? And no, there is no set screw.

Posted by: adolimpio Apr 22 2018, 02:36 PM

I don't think that's the original knob. Mine is knurled metal and has a set screw.

I suspect someone might have glued that on.

Posted by: rgalla9146 Apr 22 2018, 02:40 PM

Try levering it off with a screwdriver

Posted by: rdauenhauer Apr 22 2018, 03:25 PM

Nope thats OE, late application Early cars had the knurled metal knob
Just pressed on a D shaft the early ver did use a VERY small screw

Posted by: Geezer914 Apr 22 2018, 04:12 PM

Thanks for the replies, I'll try prying it off with a couple of small screw drivers.

Posted by: porschetub Apr 22 2018, 05:30 PM

I wouldn't touch it...most likely crack,if no set screw the plastic knob is probably molded on,just remove from the rear of the speedo.

Posted by: scallyk9 Apr 22 2018, 05:52 PM

I have both early and late. The black plastic late model knob just pulls off. You should not need to pry it.

Posted by: 914Sixer Apr 22 2018, 06:20 PM

Get you a V shaped tack puller. Only a couple of dollars. Lots of other uses on the vehicle. Great for removing body plugs

Posted by: Garold Shaffer Apr 22 2018, 06:30 PM

Posted by: mwyatt Aug 6 2020, 07:57 PM

Can someone post for me how the odometer trip reset cable is attached to the underside of the dash? I have the black plastic knob as pictured, but my car just has the cable dangling (attached to the gauge but not the dash). Thanks!