Printable Version of Topic

Posted by: mb911 Apr 25 2018, 03:00 PM

I made these simple GT ish muffler hanger brackets for use on a 6" diameter muffler like my line or the m&k to ensure proper muffler support..

If any one is interested let me know $44 shipped..

Posted by: JmuRiz Apr 25 2018, 03:05 PM

Looks good to me, I'm in.

Question, do you use the stock 2.0-style Y hanger along with this? (to give it extra support)...I plan on doing that if I can.

Posted by: mepstein Apr 25 2018, 03:41 PM

They look great. Can't wait to get mine. I had sort of rigged up something ugly but now I can make it right.

Posted by: mb911 Apr 25 2018, 04:18 PM

No need to do that but you can if you like..

Posted by: ledfoot Apr 25 2018, 04:25 PM

Put me down for one. PM me with your PayPal.
Cheers,
Michael

Posted by: mb911 Apr 25 2018, 04:48 PM

Mbconsulting21@gmail.com

Posted by: morgan_harwell Apr 25 2018, 04:48 PM

Will this work with the Dansk Stainless Steel 911 muffler I use on my 914-6 conversion?

If 'yes', then I would like one.

Posted by: Retroracer Apr 25 2018, 04:55 PM

Very cool! Questions:

1) as above, will these work with a Dansk 911 muffler early style, and
2) is it designed with side shift in mind - or tail shift - or both?

If 1=yes and 2=side shift then I'm in for one for my GT-ish build

- Tony

Posted by: mb911 Apr 25 2018, 08:01 PM

No idea for the dansk though I would think it would be darn close as 6 inch dia is what the curve is for and the adjustable slots allow it to move up and down

I set them up for a sideshift but seeing as they replace the y muffler hanger and bolt on there should be no issues.

Posted by: Retroracer Apr 25 2018, 08:11 PM

Well alrighty then. Pls sign me up for one,

- Tony

Posted by: mb911 Apr 26 2018, 07:57 AM

Just email me or paypal directly to mbconsulting21@gmail.com

Posted by: JmuRiz Apr 26 2018, 09:00 AM

Just sent in...thanks again for the cool 914 products!

Posted by: Retroracer Apr 26 2018, 10:22 AM

Payment sent - and agree, great to see these products being developed and made available to the community!

- Tony

Posted by: mb911 Apr 26 2018, 10:32 AM

You are welcome..

These are actually fairly simple.. But serve an important purpose..

I will get everyones boxed up and sent usps.. This week yet

Tony I need your last name as well..

Thanks

Posted by: johnhora Apr 26 2018, 12:32 PM

Ben...
Do you have any of these left?
If so I'll take one...
Just let me know and I'll paypal you.
Thanks...John

Posted by: mb911 Apr 26 2018, 03:02 PM

Yes I do..

Posted by: Norskpole Apr 26 2018, 04:04 PM

Hey there Ben,
Send me your payment info for 1 of these, please!
-John

Posted by: mb911 Apr 26 2018, 04:21 PM

Posted by: Cairo94507 Apr 26 2018, 04:37 PM

PP sent. Thanks Ben.

Posted by: Norskpole Apr 26 2018, 05:23 PM

PP sent....muchas gracias!

Posted by: bahnzai Apr 28 2018, 07:11 AM

Payment sent.

Ben, What do you use for straps?

Thx!

Posted by: mb911 Apr 28 2018, 07:54 AM

Constant tension clamps from mcmaster car designed to work within the 6" range for the muffler diamter. They come in stainless for about 10 dollars each.

Posted by: Krieger Apr 28 2018, 10:26 AM

Do these work for a stock 911 muffler?

Posted by: mepstein Apr 28 2018, 04:56 PM

I just got mine. Very simple and clean. Exactly what I needed.

Posted by: bdstone914 Apr 29 2018, 07:46 AM

Can you post a picture of how this installs or describe what it attaches to ?

Posted by: mb911 Apr 29 2018, 08:07 AM

Basically bolts right to the end of the trans where the 2 studs extend out where the Y bracket would bolt and then extends to the muffler where 2 band straps go around the bracket tabs and the muffler to support the muffler body just like a 911.

Posted by: mepstein Apr 29 2018, 08:47 AM

I'll have it on today or tomorrow and take a pic

Posted by: rktmn247 Apr 30 2018, 01:44 AM

Ben,
Just sent in my payment with paypal. Thanks for making these!

Posted by: mb911 Apr 30 2018, 09:05 AM

Shipped 8 today.. The folks I had addresses for. Got a couple of folks I am looking for addresses for

Posted by: mepstein Apr 30 2018, 09:32 AM

Not a lot to see but it does work perfectly. Doesn’t interfere with anything.
Took about 20 minutes to install since I had to remove the old bracket and loosen the muffler. Pretty easy, even for me.


Attached image(s)

Posted by: mb911 Apr 30 2018, 02:05 PM

The last 2 will ship tomorrow.. I need to make some more..

Posted by: mb911 May 2 2018, 01:55 PM

All have been shipped usps.. And sold out for the moment. I would also think these could be made to work with type 4 if someone wanted to..

I will build stock shortly..

Posted by: JmuRiz May 2 2018, 06:31 PM

Got mine today, thanks!

Posted by: mb911 May 3 2018, 06:03 AM

Good deal.

Posted by: Cairo94507 May 3 2018, 07:07 AM

Got mine too.

Posted by: johnhora May 3 2018, 11:22 AM

https://www.mcmaster.com/#hose-and-tube-clamps/=1col9bp

Posted by: mb911 May 3 2018, 12:13 PM

I like these..

Posted by: mepstein May 3 2018, 02:34 PM

I do too. And they’re only $8-12. What size should I buy?

Posted by: mb911 May 3 2018, 02:40 PM

8946K38

It goes from 5-15/16"- 6 1/4" should work perfect 10 bucks each..

Posted by: rktmn247 May 3 2018, 09:50 PM

Received mine today! Thanks Ben! Nice looking piece!

Posted by: mepstein May 4 2018, 05:04 AM

Only problem I had with the part is that it bolted right on. No fitting, modifying, reworking. Sort of anti climatic.

Posted by: campbellcj May 4 2018, 07:08 AM

Thank you again Ben for making these. I received mine and ordered the clamps.

Posted by: johnhora May 4 2018, 10:37 AM

Ben...got it...thanks...very nice part...lines right up with a stock 911/914-6 muffler...will get some pics..
Thanks agian for making these available!

Posted by: Steve Apr 25 2020, 10:49 AM

Someone asked me if this bracket works with Martin Botts 916 kit.
I finally got around to mounting mine. Perfect fit and looks great. I did have a Mickey Mouse home depot bracket with a 911 bracket jury rigged with the 914-4 2.0 hanger. This looks much better and much quicker to install. Only mods I had to do with my Martin Bott 916 kit, was to install longer studs on the trans. The back up switch required me to space Ben's quiet muffler back 3/8", which also required me to space the GT bracket 3/8" with washers. The previous Triad muffler was a much bigger hassle and required me to space the muffler back 2". The quiet muffler is much quieter, sounds great and no drone!!