Printable Version of Topic

Click here to view this topic in its original format

914World.com _ 914World Garage _ hellhole repair parts?

Posted by: goose2 Jun 7 2005, 11:26 PM

A buddy is resurrecting a car with baaad hellhole problems. Doesn't someone sell some preformed sheetmetal parts for this?
Thanks

Posted by: McMark Jun 7 2005, 11:43 PM

Not really, but they should. You can get the vertical wall that the battery tray mounts to. You can get the piece that the seal goes into. But not any of the longitudinal or the firewall. Form your own or buy used (hah!).

Restoration Design or AA.

Posted by: skline Jun 7 2005, 11:47 PM

Engman has been working on a kit that I will be installing in the next day or so and taking pictures of the entire install. If it goes as well as all the other stuff I have gotten from him, it should be a very nice setup. Look for the install thread by the weekend.

Posted by: trekkor Jun 7 2005, 11:48 PM

http://www.914world.com/bbs2/index.php?act=ST&f=2&t=22699&hl=metal+fabbers

Be like me

KT

Posted by: jet1 Jun 7 2005, 11:58 PM

A hellhole repair kit?? that would be great! would it be just for the top or would it repair parts of the long too? how much of the hole will it fix? I look foward to the install thread!

Posted by: lagunero Jun 8 2005, 12:11 AM

QUOTE (skline @ Jun 7 2005, 10:47 PM)
Engman has been working on a kit that I will be installing in the next day or so and taking pictures of the entire install. If it goes as well as all the other stuff I have gotten from him, it should be a very nice setup. Look for the install thread by the weekend.

Am I the chosen one? If not I'm keeping the leather seats.

Posted by: Aaron Cox Jun 8 2005, 12:11 AM

BTW - albert, thought you were picking up that 'other' roller

Posted by: skline Jun 8 2005, 12:42 AM

QUOTE (lagunero @ Jun 7 2005, 11:11 PM)

QUOTE (skline @ Jun 7 2005, 10:47 PM)
Engman has been working on a kit that I will be installing in the next day or so and taking pictures of the entire install. If it goes as well as all the other stuff I have gotten from him, it should be a very nice setup. Look for the install thread by the weekend.

Am I the chosen one? If not I'm keeping the leather seats.

Leather seat? My leather seats for my Chalon? What do you mean you are keeping them? Did you pick them up or something? Dont make me come down there.

Posted by: McMark Jun 8 2005, 01:27 AM

QUOTE (skline @ Jun 7 2005, 09:47 PM)
Engman has been working on a kit that I will be installing in the next day or so and taking pictures of the entire install. If it goes as well as all the other stuff I have gotten from him, it should be a very nice setup. Look for the install thread by the weekend.

Posted by: Engman Jun 8 2005, 06:48 AM

Yeppers - its something I have been working on....

I need to see how well these fit @ Skline house before we go the resources section.

M

Posted by: dakotaewing Jun 8 2005, 06:55 AM

Skline -
Hurry up and get with it - You are holding up the line....

TEININEEDONEOFTHOSEKITS

Posted by: skline Jun 8 2005, 07:01 AM

I am going to pull the engine out today and get started, I may have to work tonight down at the port so I will make a lot of progress today. I will start a new thread when I get to the actual install.

Posted by: lagunero Jun 8 2005, 11:54 AM

QUOTE (skline @ Jun 7 2005, 11:42 PM)

Leather seat? My leather seats for my Chalon? What do you mean you are keeping them? Did you pick them up or something? Dont make me come down there.

don't make me come down there?! bring the welder and kit, I'll take the pictures and your seats and backpad get to go home safe

Posted by: goose2 Jun 8 2005, 04:54 PM

thanks for the replies...eager to see the results Engman...and nice work Trekkor and good thread...most of us aren't that ambitious.