Printable Version of Topic

Click here to view this topic in its original format

914World.com _ 914World Garage _ 914-4 Pressure plate bolt size

Posted by: AnthonyM Apr 26 2018, 08:29 PM

What size bolt is used for the 6 pressure plate bolts for a 914-4. All stock parts.

Posted by: Mark Henry Apr 26 2018, 09:31 PM

I'd have to measure one but it's an M8-1.25 grade 8.8

Posted by: bdstone914 Apr 27 2018, 08:51 AM

90007510401 B8 x 15, Hex Head bolt, grade 8.8 minimum.

A longer bolt 20mm bolt will work as it is a through hole in the flywheel.

Posted by: AnthonyM Apr 27 2018, 01:24 PM

Any washers? Flat, spring or lock. The bolts are 20mm in length.

Posted by: porschetub Apr 27 2018, 04:31 PM

I used 20mm 8mm HT capscrews and spring washers, already had the capscrews new so used them up,I tend not to reuse the old ones.

Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)