Printable Version of Topic

Click here to view this topic in its original format

914World.com _ 914World Garage _ factory body specifications

Posted by: dr914@autoatlanta.com May 9 2018, 02:33 PM

we just scanned this series for a customer and thought that we would post it here for anyone who needed it in the future. Great for measuring during rust repair [attachmentid=650
202][attachmentid
=650206]

Attached image(s)

Posted by: douglastic May 9 2018, 02:54 PM

That drawing on p1 would make an awesome t-shirt!

Posted by: Tom_T May 9 2018, 03:37 PM

Hey George,

It looks like there was something wrong with 2 of your pages which don't display:

attachmentid=650202

attachmentid=650206

You can recheck your list of attachments to see what's up with them.

Also, that D of the scanned 914 Factory Manual for Section 8 has several pages which were misfed scans & aren't readable to various degrees. It would be most helpful to those of us with your 914 CD if you could rescan them & post here, so that we can print substitute pages.

The misfed "914 Manual - Section 8 Body" pages/diagrams follow the pages which you scanned & posed above, & are denoted by the bottom page or illustration key as:

20.1 - 1/3 "Front Body Assembly" (at angle & partially off page, parts on 4 sheets with none complete)

20.1 - ?/? "Rear Body Assembly" (probably is 20.1 - 2/1)
(no page/illustration number is readable, all is vertical streaks for picture & text on 2 sheets with both streaked & unreadable)

20.1 - 8/1 "Replacing Section of Front Body Assembly"
(Cut off or split on 2 pages - would be better reduced or scanned as one oversize page for readability)

The above aren't actual page numbers, but the subsections for the 8 Body group, so their titles in quotes above from the tops of the pages & looking at the CD or print-out should help you ID them.

If you look at the CD version, these same bad pages are there, so it wasn't a problem with the print shop who printed out my hard copies in binders.

TIA!
Tom
///////