Printable Version of Topic
Click here to view this topic in its original format
914World.com _ 914World Garage _ 914 market really is hot, $800 Chinese 914 "headers"
Posted by: Mueller May 14 2018, 05:57 PM
If you have a Boxster or a 996 you can buy stainless headers for $100.
However they want $800 for these puppies for our 914's.
They could have at least copied the better 2.0 HE's instead. Fire that marketing guy.
Posted by: SirAndy May 14 2018, 06:15 PM
The welds look nice enough ...
![popcorn[1].gif](style_emoticons/default/popcorn[1].gif)
Posted by: Jeff Bowlsby May 14 2018, 06:30 PM
Square port? Never understood why these cannot be pretty much just straight back pipes.
Posted by: JmuRiz May 14 2018, 06:33 PM
Square port? Never understood why these cannot be pretty much just straight back pipes.
I was thinking the same thing
Posted by: Mueller May 14 2018, 06:54 PM
Square port? Never understood why these cannot be pretty much just straight back pipes.
I bet they just copied a set without even having a vehicle to test them on.
Time and material could be saved if made straight (and better flow in theory)
I see why so expensive now looking at add .... They are listed as "vintage" Porsche parts.
Posted by: porschetub May 14 2018, 07:03 PM
Ha ha me too ,looks like they had lots of scrap pipe ? ,jeez someone give the guy a bender ,really nothing tuned length there...square port for 914???.
Ben where are you ?,you need to check them out.
Appears the Chinese stuff has fitment issues,yes the welds look nice but a mate was doing a 16v conversion on a mk1 Golf and said the same about the welding and I pointed out a great deal of the bends were "fusion" welded,only filler welds were on the manifold plate and the 4 way connector,and guess what it didn't fit.
Posted by: Racer Chris May 14 2018, 07:49 PM
Useless
Posted by: mepstein May 14 2018, 08:23 PM
Useless
Best summation yet.
Posted by: Maltese Falcon May 15 2018, 12:39 AM
A container ship full of Duct Tape couldn't fix the "Disconnect" between Pacific Rim auto products AND their manufacturers; that are heavily reliant on the impulsuve online shopper...that is going to "Get a DEAL"
Wait...WHAT; they make duct tape too ¿ 
Posted by: mb911 May 15 2018, 05:07 AM
Ha ha me too ,looks like they had lots of scrap pipe ? ,jeez someone give the guy a bender ,really nothing tuned length there...square port for 914???.
Ben where are you ?,you need to check them out.
Appears the Chinese stuff has fitment issues,yes the welds look nice but a mate was doing a 16v conversion on a mk1 Golf and said the same about the welding and I pointed out a great deal of the bends were "fusion" welded,only filler welds were on the manifold plate and the 4 way connector,and guess what it didn't fit.
Ugh..
Posted by: rhodyguy May 15 2018, 07:53 AM
Anyone who spends $800 on parts that are usually a 'give away' (OEM with the casings rusted off) fully deserves what they get for their hard earned money. I hope the seller is sitting on 100s of these pieces of shit.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)