Printable Version of Topic
Click here to view this topic in its original format
914World.com _ 914World Garage _ 914- 6 GT oil line eye candy
Posted by: mb911 May 24 2018, 01:25 PM
Had a set yellow zinc chromated.. Turned out nice and completes the look..
Posted by: tygaboy May 24 2018, 01:57 PM
Pretty!
What's the ID and wall thickness of that tube? Any possibility I could run these as water lines...?
Posted by: mb911 May 24 2018, 02:55 PM
Pretty! What's the ID and wall thickness of that tube? Any possibility they could be used as water lines...?
I forget the ID and will have to measure. From memory .875 ID..
Posted by: Cairo94507 May 24 2018, 03:46 PM
That's the ticket. 
Posted by: McMark May 24 2018, 03:52 PM
Pretty! What's the ID and wall thickness of that tube? Any possibility I could run these as water lines...?
Damn that's smart...
Posted by: tygaboy May 25 2018, 06:37 AM
Pretty! What's the ID and wall thickness of that tube? Any possibility they could be used as water lines...?
I forget the ID and will have to measure. From memory .875 ID..
Ben - I don't want to hijack this thread so PM me, if you'd prefer. I've purchased 1.25 OD aluminum tube but think I could get by with 1" and all -16 fittings. That's what Tony is running and he's seeing no cooling issues. I wouldn't want to go smaller than that. But do let me know the ID?
Thanks!
Posted by: GeorgeRud May 25 2018, 09:11 AM
Back before these were an option, I used -12 braided lines to feed my front cooler on my 2.7 conversion. It works fine on my street driven car, though I’d prefer going to -16 for a track car. I think Ben’s copy the factory design, so should work well.
Posted by: mb911 May 25 2018, 11:19 AM
Back before these were an option, I used -12 braided lines to feed my front cooler on my 2.7 conversion. It works fine on my street driven car, though I’d prefer going to -16 for a track car. I think Ben’s copy the factory design, so should work well.
Yes for oil cooled but he is running am ls v8 engine..
Oh and the fittings are 30mm.. I just need to double check id..
Posted by: mb911 May 25 2018, 03:16 PM
They are 7/8" od. 3/4" id
Hope that helps.
Posted by: SirAndy Jun 12 2018, 12:04 AM
Hope that helps.
Bummer, i would gladly buy a set if they also came in 1" ID. 3/4" is too small for my 3.6L.
Posted by: SirAndy Jun 12 2018, 12:11 AM
Hope that helps.
Bummer, i would gladly buy a set if they also came in 1" ID. 3/4" is too small for my 3.6L.
I lied, my current lines are -12 so they are in fact 3/4" ID.
Damn it, now you got me thinking ...
Posted by: mb911 Jun 12 2018, 06:00 AM
Hope that helps.
Bummer, i would gladly buy a set if they also came in 1" ID. 3/4" is too small for my 3.6L.
I lied, my current lines are -12 so they are in fact 3/4" ID.
Damn it, now you got me thinking ...
Lol.. They are a big line.. Let me know if I can help..
Posted by: 914forme Jun 12 2018, 06:09 PM
Ben very Nice 
I like how your thinking Chris
Posted by: mb911 Jun 12 2018, 08:36 PM
Still have 20 sets none plated let me know if anyone needs them.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)