I was just wondering if anyone has bought this P&C set from FAT and have an opinion. FAT says the cylinders are not AA, but from their "own supplier".
https://fatperformance-rimco.com/collections/pistons-cylinders/products/t4-96mm-keith-black-design-hypereutectic-piston-cylinder-set
Also, is it better to buy the KB pistons and cylinders from the same supplier (e.g. FAT or EWM) than from 2 separate suppliers?
Since FAT and Rimco are now the same ownership the cylinder may be bored stock.
KB pistons it doesn't matter who you get them from EMW still gets a cut, as they are the originators/suppliers and have an exclusive contract with KB to produce them. EMW also has the same exclusive rights to the T4 JE pistons.
The KB T4 pistons are a modified pin Ford Pinto piston.
I bought my 96mm p+c from FAT/RIMCO. Everything went together nicely but have not yet installed or run the engine yet. Hopeful to be able to report back with startup results soon.
I used AA 96mm Biral (aluminum fins with steel barrel) and KB pistons with Hastings rings.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)