Posted by: erwindv Jun 19 2018, 12:17 AM
Previous owner cut out a piece of the glove box to install gauges were the radio was initially located.
I want to use the glove box from a later model (smaller) to replace the missing piece.
Any idea how to attach it into the glove box (fiber glass, glue, ...)?
Posted by: raynekat Jun 19 2018, 01:32 AM
There's a strap that's supposed to be inside your dash that holds the glove box in....
Posted by: erwindv Jun 19 2018, 02:55 AM
QUOTE(raynekat @ Jun 19 2018, 09:32 AM)
There's a strap that's supposed to be inside your dash that holds the glove box in....
Yes, I still have got the strap but want to cut out the missing piece from one glove box and "glue" it into the other one.
Posted by: barefoot Jun 19 2018, 04:57 AM
you could ue some fiberglass patch epoxied on to the outside surface once you cut the replacement patch to size. I did this to strengthen my pedal board.
Posted by: 76-914 Jun 19 2018, 07:28 AM
QUOTE(erwindv @ Jun 19 2018, 01:55 AM)
QUOTE(raynekat @ Jun 19 2018, 09:32 AM)
There's a strap that's supposed to be inside your dash that holds the glove box in....
Yes, I still have got the strap but want to cut out the missing piece from one glove box and "glue" it into the other one.
Why? Seems like a lot of effort. Is yours an early model and you can't located the wider box?
Posted by: erwindv Jun 19 2018, 07:33 AM
QUOTE(76-914 @ Jun 19 2018, 03:28 PM)
QUOTE(erwindv @ Jun 19 2018, 01:55 AM)
QUOTE(raynekat @ Jun 19 2018, 09:32 AM)
There's a strap that's supposed to be inside your dash that holds the glove box in....
Yes, I still have got the strap but want to cut out the missing piece from one glove box and "glue" it into the other one.
Why? Seems like a lot of effort. Is yours an early model and you can't located the wider box?
No, to install I need the early, wider one with the missing piece and I have a spare, smaller one.
Posted by: gcrotvik Jun 19 2018, 07:58 AM
QUOTE(erwindv @ Jun 19 2018, 06:33 AM)
QUOTE(76-914 @ Jun 19 2018, 03:28 PM)
QUOTE(erwindv @ Jun 19 2018, 01:55 AM)
QUOTE(raynekat @ Jun 19 2018, 09:32 AM)
There's a strap that's supposed to be inside your dash that holds the glove box in....
Yes, I still have got the strap but want to cut out the missing piece from one glove box and "glue" it into the other one.
Why? Seems like a lot of effort. Is yours an early model and you can't located the wider box?
No, to install I need the early, wider one with the missing piece and I have a spare, smaller one.
I would post a WTB in the classified section to find an early glove box. I would think someone might have one available. There is a FS ad in the classified now for a full 71 part out. Contact the seller and see if he/she has one.
Posted by: worn Jun 19 2018, 09:22 AM
QUOTE(erwindv @ Jun 18 2018, 10:17 PM)
Previous owner cut out a piece of the glove box to install gauges were the radio was initially located.
I want to use the glove box from a later model (smaller) to replace the missing piece.
Any idea how to attach it into the glove box (fiber glass, glue, ...)?
I have used shellac as a binder, along with epoxy, acrylic, and white glue. It is paper mâché no mater how you slice it.
I hate installing these things though. Don't make it too inflexible.