Mounted them up today just to check front clearences etc. They are definitely all about function, not sure if I'll win any beauty contests! They do fillout the car nicely however.
pic1
Attached image(s)
pic2
Attached image(s)
pic 3
Attached image(s)
pic 4
Attached image(s)
This is my favorite shot. The Hoosier on an 8" rim is easily 1 1/2 inches wider that the Yoko's. The Hoosier is also shorter so I think I'll have a little more power out of those slow corners - but I guess down side is all be on the rev limiter sooner too.. I dont have an accurate scale but I think race wheels/tires are at least 2-3 lbs lighter
Attached image(s)
So what kind of wheels are they.
QUOTE (URY914 @ Jun 13 2005, 11:53 AM) |
So what kind of wheels are they. |
QUOTE (URY914 @ Jun 13 2005, 11:53 AM) |
So what kind of wheels are they. |
QUOTE (Joe Ricard @ Jun 13 2005, 12:03 PM) | ||
BFU or Butt Fucking Ugly Until you see them at speed I'll bet. Hey Grant no fair you cheated the car is still up on jackstands or something WAY TOO HIGH in the air. |
Take your car off the jackstands, and mount the freeking wheels! Ferchrissakes!
M
Naw Grants car is now so lite with the fiberglass this and that. That must be how it sits at ride hieght.
Yes Grant you go 1/2" more back space than my Red ncek wheels. But I had to "Real Man Handle " the fenders out like 2 inches.
For reference I think I can drive my car under yours.
We have just got to have a beer sometime. What a hoot that will be. Someday I will get out to one of them classics (WCC, FFC, MSUR)
Good job on getting the tire/wheel set-up on the car.
My Hoosier's arrived today.
They're BIG.
I'm a little nervous about mouting them on my 5.5" rims.
They say 6.5" is the minimum "recommended".
The chance of decreased performance potential and tire life looms.
KT
QUOTE (Joe Ricard @ Jun 13 2005, 05:45 PM) |
For reference I think I can drive my car under yours. |
QUOTE (trekkor @ Jun 13 2005, 08:00 PM) |
Good job on getting the tire/wheel set-up on the car. My Hoosier's arrived today. They're BIG. I'm a little nervous about mouting them on my 5.5" rims. They say 6.5" is the minimum "recommended". The chance of decreased performance potential and tire life looms. KT |
QUOTE (redshift @ Jun 13 2005, 03:17 PM) |
Take your car off the jackstands, and mount the freeking wheels! Ferchrissakes! M |
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)