Printable Version of Topic

Posted by: northwoodslakes@gmail.com Jul 24 2018, 08:43 PM

I've bought a really nice vintage Dino leather wheel and am wondering how to adapt this to my 6-bolt Momo steering wheel adapter....Suggestions anyone? Thanks

Posted by: Mike Bellis Jul 24 2018, 10:53 PM

QUOTE(northwoodslakes@gmail.com @ Jul 24 2018, 07:43 PM)

I've bought a really nice vintage Dino leather wheel and am wondering how to adapt this to my 6-bolt Momo steering wheel adapter....Suggestions anyone? Thanks

Posted by: 7TPorsh Jul 25 2018, 09:16 AM

I've seen 6 to 5 hole adaptor plates out there. May work.

Here's one: https://www.ebay.com/itm/1-2-Steering-Wheel-Spacer-Kit-for-5-hole-Steering-Wheel-to-6-hole-Adapter/121246087488?hash=item1c3ad47940%3Ag%3ABCUAAOSwP~tW5lPd&_sacat=0&_nkw=5+hole+adapter+steering&_from=R40&rt=nc&LH_TitleDesc=0%7C0

Posted by: 7TPorsh Jul 25 2018, 09:27 AM

If the holes on the adapter don't line up with the wheel then drill and tap the adapter plate so you don't mess with the hub or wheel.

Posted by: Mark Henry Jul 25 2018, 01:45 PM

I don't know if this will work... but you could look at sacrificing an old steering wheel to make into a custom hub.

Posted by: northwoodslakes@gmail.com Jul 28 2018, 10:48 PM

QUOTE(7TPorsh @ Jul 25 2018, 08:16 AM)