There was a thread regarding parts necessary to rebuild the harness you have.
I proposed a GB if there were 10 takers and will throw in the inspection cover to sweeten the deal!
So, do we have 10?
Attached thumbnail(s)
as stated on the previous thread, I am in.
(already in my cart )
This is a nice savings. I just had it pointed out to me on my build and project thread that mine is in need of replacement, and should have it replaced before putting my motor back in the car. so lets get 9 more on this asap- thanks Mark!
I'm in for one.
I'm in!
I’m in
Please put me down for one!
One.
Add me!
Nice 3 to go.
I need two.
In
Looks like 10!
Got our 10, I'll open up the GB and send all PMs shortly.
I will keep this open til the 15th if anyone wants one. we have about 10 in stock and will have another 10 done this next week. I really do like to see these replaced as I've seen some scary ones being removed. Some that have electrical tape patches, crunchy wires, and black as the wiring got way to hot.
So, for fun post up your nastiest harness pics !
i did a big order yesterday - print and call, that was being held for the results of this , which includes a few parts i forgot in last weeks orders , and new bumper tops! cant wait to get my next order to arrive, once i get this harness my motor can go into the car!
Here’s a pic of my nasty old one which was more tape than wire...and a link to the video I made to swap it out with the pristine 914Rubber one...
https://youtu.be/J4UNCeoOcG0
I'm in for one.
Thanks,
John
Im in
I'd like one also please!
Thank you,
Andrew
PMs sent to all.
If not too late, I am in for one. Thanks, Mark.
No, PM has been sent sent
THX
I ordered mine and here is the stupid question.
Can you replace it with the alternator still in the car?
Greg,
What is that out of? a 911? or a 6?
I find a few things a little different but could make them. A few more wires and clips.
What I find really unusual is the position on the larger grommet at what I assume is the alternator side (green circle) appears to be backwards (nipple inside the metal toward alternator, and the grommet (red circle) is way too small for the 4 sheet metal.
Attached image(s)
GB open 'till the 15th... I'm in. Please put me down for one.
I need one if the GB is still open.
Zach
A little duct tape you'll be good to go!
I'm in, if it's not too late.
Thanks, Dan
Just ordered mine! Thanks!
Pms sent to all
And No you are not too late.
I'm in. Might be good to have around.
Late to the party, sorry.
Can I get 2?
Oscar
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)