Because trying to find 2.0 heads are becoming more rare to fine ..I ran across this ad
Is this worth doing if I already have a set of 1.7 heads to modify ??
What do you experts think ... Take a look and let me know ... Thanks !!
A pair of 1.7 914 heads, "Q" castings built by Brother's Machine in Ontario CA. Cross posted to Pelican classifieds in link below, but a few details here:
56cc combustion chambers
Opened to 1.8/2.0 bore (94/96mm bore)
12 mm Plugs relocated to 2.0 location
Chambers welded up & reground with unshrouded plugs and generous quench area
Dual springs
Heavy exhaust port modifications
These were built to move some air.
http://forums.pelicanparts.com/porsche-914...-914-heads.html
Why? you can buy new 914 2.0 core repops, build a set from there.
Link doesn't work for me, just goes to the forums page.
Here are the ones that Len just did a small group buy with. they don't have much of a track record, but you don't have to do all the mods that the 1.7L AMC castings need to make into a 2.0L head.
https://aapistons.com/collections/cylinder-heads-components/products/aa-bare-2-0l-porsche-914-casting-3-stud-round-port
http://www.914world.com/bbs2/index.php?showtopic=327744&hl=heads&st=0
See thread above. Might want to PM Len (HAM Inc is his screen name)
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)