Looks interesting. I wonder how hard it would be to make.
Attached image(s)
I don't know if I would trust that. It looks like it might twist or something.
The ram on that thing is as big as a rhino dick.
Way off topic
Good reading about a woman that gives rhinos handjobs for sperm samples
http://www.sosrhino.org/news/reader.php
http://www.spectator.net/1172/pages/1172_queen.html
The lift looks a lot and works like mine but mine is only a 3/4 lift or has a ram like a horse dick.
Attached image(s)
Bieng the lift businees yes I have sold those
they very good for the price
Bendpak used to sell them
I have something similar
Isnt that Phils car? Perhaps he'll chime in?
how much?!! website? don't leave me hanging!
you too chappy!
Mines a vintage service station lift I picked up for 350 bucks, I tried some searches on the web for information on it but came up empty. Check the classifieds now and then sometimes you can get lucky.
QUOTE (iamchappy @ Jun 15 2005, 10:10 AM) |
Mines a vintage service station lift I picked up for 350 bucks, I tried some searches on the web for information on it but came up empty. Check the classifieds now and then sometimes you can get lucky. |
I looked at making one, but frankly didn't want to get side-tracked from getting things done on the car. I think Harbor Freight or Northern or ? catalog's them.
Andy
Harbor Freight has a couple, one that's 220 only, the other will do 110 or 220. $800-1200. Neither will go low enough to fit under a 914 without helpers, like the boards under the wheels in the previous pic. There are a few others that will just barely go flat enough (4.75" is the shortest I've seen).
They both weigh over a 1000lbs.
I have a PRO-6MR from Direct-Lift and I LOVE it!!! It is so perfect for working on a 914 or 911. I have even lifted my 1997 Range Rover HSE with it!
These lifts are not so good for a front-engined rear wheel drive car, but IDEAL for 914 and 911s.
Make sure you get the "truck adapters" with it. I never lift a 914 without those in place and some distributors charge extra for those.
I wouldnt work on anything without it. I could never go back.
Make sure you get a quote INCLUDING the shipping, because the shipping can be very expensive.
Here is one web site:
http://www.directlift.com/direct_pro6mr.htm
Attached image(s)
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)