Printable Version of Topic
Click here to view this topic in its original format
914World.com _ 914World Garage _ trunk fixings
Posted by: JFG Sep 21 2018, 09:14 AM
what fixes in this single hole?
Posted by: JFG Sep 21 2018, 09:15 AM
is this the correct way/side to fit the roof holder?
Posted by: burton73 Sep 21 2018, 09:34 AM
QUOTE(JFG @ Sep 21 2018, 08:15 AM) 
is this the correct way/side to fit the roof holder?
90 degrees clockwise I believe.
Bob B
Posted by: ClayPerrine Sep 21 2018, 09:36 AM
QUOTE(JFG @ Sep 21 2018, 10:14 AM)
what fixes in this single hole?
The charcoal canister mounts in that hole inside the engine compartment.
Posted by: AZ914 Sep 21 2018, 10:11 AM
The roof holder should be pointing straight up to the sky
Posted by: JFG Sep 21 2018, 01:33 PM
thanks for the info.
i'll stand the roof clamps up tomorrow and put a rubber bung in the canister hole tomorrow.
Posted by: dr914@autoatlanta.com Sep 21 2018, 01:58 PM
funny man, looks like the holder is bowing down !!!
QUOTE(JFG @ Sep 21 2018, 08:15 AM)
is this the correct way/side to fit the roof holder?
Posted by: mark04usa Sep 21 2018, 09:32 PM
These are left and right side specific parts. The roof slot angles downward toward the outboard side...marked L and R (IIRC)
Posted by: JFG Sep 22 2018, 02:02 AM
finally, does the roof fit inside the trunk the same direction as if it is fitted to the roof or is it stored backwards?
Posted by: barefoot Sep 22 2018, 04:56 AM
QUOTE(JFG @ Sep 22 2018, 04:02 AM)
finally, does the roof fit inside the trunk the same direction as if it is fitted to the roof or is it stored backwards?
Yep
Posted by: PatrickB Sep 22 2018, 05:09 AM
QUOTE(barefoot @ Sep 22 2018, 06:56 AM)
QUOTE(JFG @ Sep 22 2018, 04:02 AM)
finally, does the roof fit inside the trunk the same direction as if it is fitted to the roof or is it stored backwards?
Yep
(same direction)
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)