Printable Version of Topic

Click here to view this topic in its original format

914World.com _ 914World Garage _ Location for head temp sensor.

Posted by: JMT Oct 6 2018, 05:59 PM

How do these locations look for clearance for the sensor. I put a slight bend so the spark plug socket would clear.Attached Image Attached Image

Thanks..

Posted by: JMT Oct 6 2018, 06:05 PM

If I ground a nice little "pocket" the sensor wouldn't spin when putting in the spark plugs. Or am I over thinking this.

Posted by: Mblizzard Oct 8 2018, 02:53 PM

You are spot on! The black mark is where I notched out for mine. Saves lots of time.

Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)