I noticed that my rear brake lights don't come on until a lot of pressure is applied to the pedal. Is there a way to correct this to have the lights come on under light pressure? Is there an adjustment somewhere?
Attached thumbnail(s)
The brake light switch is under the pedal board and behind the brake pedal. There is an adjustment there.
Haynes. P.129 section 30 for the adj procedure.
It’s simple. Just check the pedal and adjust to trigger the light with less travel.
I just did this, easy fix and I did it myself
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)