Printable Version of Topic
Click here to view this topic in its original format
914World.com _ 914World Garage _ original external mirror bolts
Posted by: milwlandrover Oct 11 2018, 01:17 PM
Does anyone know what size bolt were used in the original external mirrors? I found a mirror to replace my cheap plastic/rubber mirrors but it only used one bolt which the previous owner had used a plastic anchor to make it fit....
thanks again.
Posted by: worn Oct 11 2018, 01:35 PM
QUOTE(milwlandrover @ Oct 11 2018, 12:17 PM) 
Does anyone know what size bolt were used in the original external mirrors? I found a mirror to replace my cheap plastic/rubber mirrors but it only used one bolt which the previous owner had used a plastic anchor to make it fit....
thanks again.
I am pretty sure six mm. Two captive nuts inside the door skin. I hope the plastic anchor is in a hole covered by the mirror.
Posted by: JFG Oct 11 2018, 01:43 PM
2 m6 countersunk but with a slight domehead
Posted by: mepstein Oct 11 2018, 02:03 PM
They are stainless steel. Same as the door screws. 914 rubber has them if you are already doing an order.
Posted by: milwlandrover Oct 12 2018, 06:55 AM
Thanks everyone! bought the bolt and pad and cuz the order was small I also bought interior carpeting. Getting closer to being a real car everyday.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)