Printable Version of Topic
Click here to view this topic in its original format
914World.com _ 914World Garage _ Autocross at El Toro - Sunday 10/14
Posted by: yeahmag Oct 15 2018, 10:42 PM
The little green monster did it again! Evan took 1st in CC06, 1st in BRI, and 13th overall (raw time). I missed 2nd by 3/10 of a second!
We have some roll over oversteer (and therefore hanging the front, inside wheel), so I'm hoping to add a touch more rear spring to try and combat that.
https://www.youtube.com/watch?v=LjJB6KwVjq8
Evan's run:
https://www.youtube.com/watch?v=3hRf0cg7RNU
Posted by: 76-914 Oct 16 2018, 09:23 AM
Video unavailable.
Posted by: yeahmag Oct 16 2018, 09:37 AM
Click the “watch on YouTube” and it will work.
Posted by: My 914 Oct 16 2018, 02:17 PM
Good job. Nice driving!
Posted by: TravisNeff Oct 16 2018, 02:36 PM
What a fun ride! 
Posted by: Gmanscott55 Oct 16 2018, 05:36 PM
You guys killed it. Always great seeing a 914 beat the GT3's. Great seeing you again.
Posted by: marksteinhilber Oct 16 2018, 06:19 PM
Wow, great runs! What engine is that? Sounds like a lot more than what my T4 has. Video looks a lot faster than when I ran at El Toro with the engine floored and at peak of engine power and torque curves. 
Posted by: SO.O.C914er Oct 16 2018, 07:31 PM
Nice driving, man I want to do that. Looks like all second and third gear stuff? 
...Paul
Posted by: 914-300Hemi Oct 16 2018, 10:35 PM
Look like great runs.
Posted by: yeahmag Oct 17 2018, 10:49 AM
Wow, great runs! What engine is that? Sounds like a lot more than what my T4 has. Video looks a lot faster than when I ran at El Toro with the engine floored and at peak of engine power and torque curves.
It's just a 2L with a Raby 86a cam variant, 2L heads with dual springs, and a 4-1 header with a Phase 9 style muffler (Tangerine Racing). All of the magic is getting everything right both in assembly and in the combination of parts. We run it to 7K RPM if necessary, but it's just to avoid a shift. It's not making power up there.
Additionally, I spent a lot of time on things like decking the case, deck height, CR, making sure all the components match together nicely (intake, gasket, head for example), and tuning. It also has an MSZ box (short ratio 2-3-4, lower 5th) built by Doctor Evil.
Finally, the motor is dry sumped using a CB Performance dry sump that I heavily worked over. This allows it to stay alive at high G and RPM loads. Watch the oil pressure gauge on the far left as I go through the sweepers! Doesn't move! That pump doesn't have the greatest idle oil pressures though.
Posted by: yeahmag Oct 17 2018, 10:49 AM
Nice driving, man I want to do that. Looks like all second and third gear stuff?
...PaulYup. I've never hit 4th in an autocross even in PCA-OCR (which makes big courses like you saw). Join PCA OCR and come play!
Posted by: brilliantrot Oct 17 2018, 09:49 PM
Wow, great runs! What engine is that? Sounds like a lot more than what my T4 has. Video looks a lot faster than when I ran at El Toro with the engine floored and at peak of engine power and torque curves.
Aaron really built a great motor......... and car. It rips. A cam, head, and valve train package to get them to rev really makes the car a lot more fun and significantly faster.
-Evan
Posted by: jim_hoyland Oct 18 2018, 05:13 AM
Congrats Aaron ! Great news. Please post here in the garage before the next autocross at El Toro, several of us will want to drive over and give support and watch.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)