SO I bought the wrong HELLA driver lights, the 500 series, I thought they were 5" that I could put in where the round early fogs mount up. I have a very nice set of fog lights but its not the same of course, not as bright. I was going to put these HELLA ones in there but the are too bit, not 7" but not 5", weird, so I thought I would put them in front but at the bumper level and not thru on the bumper as I have brand new chrome bumpers, but maybe mounted from a bracket that would come thru between the stock valance and the bumper? if it has not been made before I guess I will make it or get something from Lowes or Home Depot that could be used as such. I could mount them in the front license place mount holes but that seems too close together.
any suggestions or ideas that would be great.
btw the driving lights are the ones sold on Amazon.
Phil
There is no advantage to mounting Driving lights far apart.
They are mounted between the headlight in race cars all the time.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)