Printable Version of Topic
914World.com _ 914World Garage _ Roll Bar Aluminum Trim Install
Posted by: xperu Nov 1 2018, 11:21 AM
When installing the 3 aluminum trim pieces on roll bar, are the 2 side trim pieces the only support for the top roll bare piece. The reason I’m asking is on my previous 914 I thought there was a clip in the center of the trim piece that fit in a hole in the bar to hold it in place. Thanks
Posted by: toolguy Nov 1 2018, 11:28 AM
the horizontal center bar should have 3 clips that secure it to the rollbar frame at the pinch weld seam
Posted by: mepstein Nov 1 2018, 11:51 AM
Those 3 trim clips hold it very secure. It takes a pretty good tug to remove.
Posted by: xperu Nov 1 2018, 12:34 PM
That’s what I thought. My car has no holes. Maybe covers during body work. I”ll start a search and find. Thanks guys. Mike
Posted by: mepstein Nov 1 2018, 01:07 PM
QUOTE(xperu @ Nov 1 2018, 02:34 PM)
That’s what I thought. My car has no holes. Maybe covers during body work. I”ll start a search and find. Thanks guys. Mike
No holes. They clip on to the seam.
Posted by: xperu Nov 1 2018, 01:19 PM
QUOTE(mepstein @ Nov 1 2018, 02:07 PM)
QUOTE(xperu @ Nov 1 2018, 02:34 PM)
That’s what I thought. My car has no holes. Maybe covers during body work. I”ll start a search and find. Thanks guys. Mike
No holes. They clip on to the seam.
OK Mark, I've had these off for about 10 years and could not remember, I will have to do a search and find some. Thanks Mike
Posted by: mepstein Nov 1 2018, 01:27 PM
part # 914.559.223.10
About $10 each at the porsche dealer but you can probably find used. Maybe bdstone, Garold, ect
@http://www.914world.com/bbs2/index.php?showuser=6213
Attached image(s)
Posted by: Chi-town Nov 1 2018, 01:28 PM
Anyone sell those three clips? Mine are missing also
Posted by: xperu Nov 1 2018, 01:29 PM
QUOTE(mepstein @ Nov 1 2018, 02:27 PM)
part # 914.559.223.10
About $10 each at the porsche dealer but you can probably find used. Maybe bdstone, Garold, ect
Thanks Mark, I had no clue what they looked like. Again Thanks
Posted by: xperu Nov 8 2018, 02:26 PM
QUOTE(mepstein @ Nov 1 2018, 01:27 PM)
part # 914.559.223.10
About $10 each at the porsche dealer but you can probably find used. Maybe bdstone, Garold, ect
@http://www.914world.com/bbs2/index.php?showuser=6213
OK so now that I picked up the 3 clips, What is the best method to install. I looked at several threads, but no info. Like I said before it's been 10 years or so sense I removed the trim and really can't remember. I just do not want to screw things up. Thanks Mike
Posted by: mepstein Nov 8 2018, 02:49 PM
QUOTE(xperu @ Nov 8 2018, 03:26 PM)
QUOTE(mepstein @ Nov 1 2018, 01:27 PM)
part # 914.559.223.10
About $10 each at the porsche dealer but you can probably find used. Maybe bdstone, Garold, ect
@http://www.914world.com/bbs2/index.php?showuser=6213
OK so now that I picked up the 3 clips, What is the best method to install. I looked at several threads, but no info. Like I said before it's been 10 years or so sense I removed the trim and really can't remember. I just do not want to screw things up. Thanks Mike
Clip goes on the trim then push trim onto targa bar. Push straight on, it doesn’t slide on from the side.
Posted by: dr914@autoatlanta.com Nov 8 2018, 02:51 PM
PLENTY on the shelf, and we have used as well
QUOTE(Chi-town @ Nov 1 2018, 12:28 PM)
Anyone sell those three clips? Mine are missing also
Posted by: xperu Nov 8 2018, 03:37 PM
QUOTE(mepstein @ Nov 8 2018, 02:49 PM)
QUOTE(xperu @ Nov 8 2018, 03:26 PM)
QUOTE(mepstein @ Nov 1 2018, 01:27 PM)
part # 914.559.223.10
About $10 each at the porsche dealer but you can probably find used. Maybe bdstone, Garold, ect
@http://www.914world.com/bbs2/index.php?showuser=6213
OK so now that I picked up the 3 clips, What is the best method to install. I looked at several threads, but no info. Like I said before it's been 10 years or so sense I removed the trim and really can't remember. I just do not want to screw things up. Thanks Mike
Clip goes on the trim then push trim onto targa bar. Push straight on, it doesn’t slide on from the side.
Thanks Mark, ur always a big help. Thanks again. Mike
Posted by: rgalla9146 Nov 9 2018, 01:03 PM
Just to clarify...The clips are slid into the horizontal aluminum trim then the piece is
pushed onto the pinch weld.
Posted by: dr914@autoatlanta.com Nov 9 2018, 01:15 PM
yes three clips slide into the aluminum trim and then the trim is clipped to the roll bar, then the end pieces are installed
QUOTE(rgalla9146 @ Nov 9 2018, 12:03 PM)
Just to clarify...The clips are slid into the horizontal aluminum trim then the piece is
pushed onto the pinch weld.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)