Looking for the "best" spark plugs that fit. I have bought two sets now that two wires are short
Try http://www.tangerineracing.com/.
I've never had problems with the beru
I use Beru. If you have a 2.0L order 912/356 wires. They have the right connectors, 2 long, 2 short.
I use Beru. I have a set ready to go on Mick's car in the am.
beru from partsgeek, $25.00
Mallory ignition?
Maybe
What about Magnecor? Hoping they fit properly, heard of complaints about fitment with Beru.
Haven't had any problems with my magnacore wires
A little pricey but you wanted the best! Plus they dress up your engine!
https://www.pelicanparts.com/More_Info/CE919235R.htm?pn=CE-9192-35-R&catalog_description=Clewett%20Engineering%20%38mm%20High%20Performance%20Ignition%20Wires%20%2D%20RED&SVSVSI=5882
Attached thumbnail(s)
Attached image(s)
Parts Klassik (Kurt Donohoe) offers wires ends for Beru wires. Remove the Beru ends and install these.
https://www.partsklassik.com/p-2378-1k-ignition-wire-connector.aspx
Best plug wires will depend on your dizzy.
For the stock distributor the Beru wires work great.
If you are using a Mallory optical (or other electronic/non-points dizzy) use the fatter spiral wound wires.
Zach
Are the stock Bosch ones any good?
Konrad
The Beru set went into Mick's car without a hitch. All with a nice tight fit.
Thanks for everybody's help.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)