anyone got a good picture and maybe some dimensions of the rubber latches used on the rear deck lid (bonnet) of the factory GT cars ?
http://www.pbase.com/9146gt/gt_fiberglas_balsa_wood_trunk_lids_rubber_latches
The real question is where can you get a kit?
mittelmotor
I got mine from Pegasus Racing...
Attached image(s)
Gosh I think they are actually a general purpose part and can't place it? Maybe in the boating world? I know I saw it recently someplace I was at.. Maybe semi trucks?
Regarding ConeDodger's recommendation, I went with the Pegasus Racing ones too. Slightly different in detail design and dimensions, but they claim to be made of Stainless, vs the aluminum of the originals. Hopefully more resistant to oxidization...? Been on the car a couple of years and still look brand new,
- Tony
Which ones did you get Tony? How much stretch did you go with?
Here's what I found on Pegasus
https://www.pegasusautoracing.com/keywordsearch.asp?KeywordStart=rubber+latch
These on Amazon don't look bad but maybe too small:
https://www.amazon.com/gp/product/B0055DQN4O/ref=s9_acsd_top_hd_bw_b16rkr_c_x_5_w?pf_rd_m=ATVPDKIKX0DER&pf_rd_s=merchandised-search-4&pf_rd_r=GMT4142KA4EXNXWM10V2&pf_rd_r=GMT4142KA4EXNXWM10V2&pf_rd_t=101&pf_rd_p=2aa3d199-86dc-562a-91a2-54ee389bea4a&pf_rd_p=2aa3d199-86dc-562a-91a2-54ee389bea4a&pf_rd_i=16412941
Pegasus. Summit. Jegs all have a variety of generic hold downs
The generic ones are often cheap chrome steel and look terrible when they rust. I like stainless or coated aluminum.
Marine app then you know they are stainless.
tractor supply has them.
I would agree find SS ones, and test with a magnet to make sure the content is not a high in iron. Cheap SS is all over the place now.
yup one of the guys who makes parts for us overseas offered them to us:
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)