Printable Version of Topic

Posted by: mb911 Dec 17 2018, 12:06 PM

These are a completed set of 1.625 headers for Luke.. They turned out nicely and he asked I share a picture with world members. Hope everyone enjoys.

Posted by: rudedude Dec 17 2018, 01:22 PM

Ben,
Those look awesome one of these days I will need a set with a heat option.

Posted by: Triaddave Dec 17 2018, 01:50 PM

Yes, they look real nice and clean. GOOD JOB!

Posted by: Luke M Dec 17 2018, 03:28 PM

Thanks for posting this Ben.
Can't wait to see them in person.

Posted by: mb911 Dec 17 2018, 05:09 PM

Yes you will. You suffer from the same great weather I do ..

Posted by: mb911 Dec 17 2018, 05:10 PM

Luke no problem Sorry for the delay in pictures.. Doing catch up this week.

Posted by: gms Dec 17 2018, 06:40 PM

nice

Posted by: Larmo63 Dec 17 2018, 08:38 PM

I'd ceramic coat those babies!

Those look nice, Ben....!

Posted by: porschetub Dec 17 2018, 11:08 PM

Think they are stainless(304 ?) no need to coat as far as I can tell.
Really nice work Ben,well done,what size engine? .

Posted by: Krieger Dec 17 2018, 11:39 PM

Beautiful work!

Posted by: mb911 Dec 18 2018, 06:13 AM

Yes 304 ss.

Thanks everyone..

Posted by: Luke M Dec 19 2018, 11:57 AM

Hi Ben,

I received my headers.. Man these look great and too darn nice to install..



"Really nice work Ben,well done,what size engine?''

Going on a 2.7 RS spec engine with a bump in compression and Solex cams.

Posted by: mb911 Dec 19 2018, 01:43 PM

Awesome.. Thanks again..

Posted by: Triaddave Dec 19 2018, 01:52 PM

Hey Ben,
Did I read that you can make those into HEAT EXCHANGERS ! and what kind of cost for the headers and/or HE.?

Posted by: mb911 Dec 19 2018, 02:20 PM

@http://www.914world.com/bbs2/index.php?showuser=1478

Yes I do

914-6werkshop.com has everything listed. Heat exchangers are $1950 until Jan 1

Posted by: mepstein Dec 19 2018, 02:26 PM

Attached image(s)

Posted by: 90quattrocoupe Dec 20 2018, 12:39 PM

Mad skills.

Greg W.

Posted by: maf914 Dec 24 2018, 09:42 AM

Ben, Beautiful work!

Are you still working on the 914-4 mufflers?

Posted by: mb911 Dec 24 2018, 01:55 PM

@http://www.914world.com/bbs2/index.php?showuser=632 yes.. Will have them in process.. Should have something shortly.. Mid January. Taking pre orders now..

Posted by: echocanyons Dec 25 2018, 11:54 AM

Did you change the size of the collector too?

Posted by: mb911 Dec 25 2018, 12:39 PM

Regarding type 4 or for the header collector?

Posted by: echocanyons Dec 25 2018, 04:16 PM

The 1.625 unit in the post

Posted by: mb911 Dec 26 2018, 01:17 PM

They are slightly larger as they are made from 1.625 primery material and the tubing is expanded to 2.125 but necks to 2" to fit into the 2 bolt oval flange.. That is the choke point just like the 3.2 Carreras with a 2 in1 out muffler you are restricted by those muffler flanges.. If you go to b bands all around the sky is the limit.