Printable Version of Topic

Posted by: Mowog4 Jan 1 2019, 03:21 PM

I just had a shifter cable break on my Subaru conversion, I can’t remember where I bought them. Anyone have a source? Thanks
Ed

Posted by: jimkelly Jan 1 2019, 03:32 PM

i believe it is called a - push pull cable. measure length from tip to tip and measure sheath from edge to edge, and you should be able to buy one from a variety of places including. http://www.controlcables.com/shift-cables/

Posted by: 914forme Jan 1 2019, 03:38 PM

Push pull / universal control cable, and quality is all over the board. I have found best luck with stuff designed and used by the boating industry. The gold standard has been Teleflex for years and years.

Posted by: turnaround89 Jan 1 2019, 10:36 PM

http://https://www.cccables.com/Cables/PushPull/4SeriesPP.aspx

Here is what I used. Post #23 shows my setup in the link below

http://www.914world.com/bbs2/index.php?showtopic=310492&st=20

Posted by: 76-914 Jan 2 2019, 07:02 PM

Control Cables Inc. Great folks, too!

Posted by: andys Jan 3 2019, 09:26 AM

+1 for Control Cables Inc.

Andys