Long story short, the deeper I get into this car, the more rust I find and I'm not sure how to proceed.
At this point, on the passenger side I have the following parts that are in need of repair
Inner long and outer long underneath the door sill
Outer layer of long in the engine bay
Inner layer of long in the engine bay
Outer layer of long in fender well
Inner layer of long in fender well
Entire outer firewall
Bottom few inches of inner firewall
4 cyl motor mount
floors
https://imgur.com/exq7u1Z
https://imgur.com/RAtMmDJ
https://imgur.com/fF5Kd6q
https://imgur.com/3Cbikhr
https://imgur.com/EoKM4T6
https://imgur.com/ftwrpRu
I know that anything can be repaired with enough time and $$, but what are the chances that a hobbyist such as myself call pull this off in any respectable way?
I've built extremely stout door braces, but I'm very wary about how much metal I can take off this thing without it twisting and deforming seriously enough to effect future driving enjoyment.
Part 2 of the question.
Say I decide to jump into it. In what order should I tackle the long repairs and what additional bracing should I build in?
Thanks in advance guys, I'd be completely stuck without your input here.
check this restoration thread
http://www.914world.com/bbs2/index.php?showtopic=244443&hl=
Do you want a big project or a running car. Cheaper and way faster to buy a solid chassis and switch the parts over but it’s your call.
I'm about 2/3 through a similar project. It's a big project for sure, but has been very rewarding for me. My welding skills were remedial when I started. Yours is doable, but definitely more than a medium project.
You have to ask yourself the eternal question, is it about the journey, or the destination? Meaning do you want to restore a car or drive one? With this car you'll spend several years restoring it, not driving it, but for some guys that's what it's about. I've bought many a freshly restored car from guys who within a year of restoring it are itching to get going on something else. Driving it and going to cars and coffee gets old for them, they want to make metal sing!
So if you're wanting to drive a 914 on the weekends soon, dump this one and buy a driver, maybe do some personal mods to it to stay engaged.
Life occurs on the sides of the mountain, not at the top.
Fix it. You'll learn a lot, and learn a lot about yourself. You can't buy that sort of thing.
But I'm just one guy with an opinion...
If you like to weld, fix it. If you don't know how to weld, do what Mepstein stated (and I did) and buy a new roller.
Boy does that look familiar. Just count on it taking longer than you think.
So far my project has been both exasperating and rewarding, and I am still at least 18 months out.
Looking at what the people here have accomplished and their support is invaluable.
I could have—maybe should have—looked for a chassis in better shape, but I have the car, and the fact that I am saving one and I will know the structure is sound when I am done and will outlast me is a good feeling.
I am getting wary about putting miles on my 993, as the car is slowly appreciating, but a 914 that I restore seems like it will somehow be immortal, because I will know I can always bring it back to life
-Andrew
I think it’s easier to put back together than take it apart.
I like welding and it’s pretty satisfying to see what happens when it goes together.
And becomes this
the 914 goes together easily and is a simple car PLUS all of the parts you need are easlily obtained. If you can cut and weld you are all set, looks like you have a good start. We have many times, repaired much much worse. (all because of that battery leaking!)
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)