Printable Version of Topic

Click here to view this topic in its original format

914World.com _ 914World Garage _ Darn it lost the left hand ignition conversion thread

Posted by: mb911 Jan 10 2019, 08:34 PM

Anyone have a link to it?? Thanks

Posted by: mepstein Jan 10 2019, 08:52 PM

http://www.914world.com/bbs2/index.php?showtopic=299541&hl=911%20column&st=0

Posted by: SirAndy Jan 10 2019, 09:04 PM


http://www.914world.com/bbs2/index.php?showtopic=82045

http://www.914world.com/bbs2/index.php?showtopic=306961

http://www.914world.com/bbs2/index.php?showtopic=243875

http://www.914world.com/bbs2/index.php?showtopic=206113

bye1.gif

Posted by: mb911 Jan 11 2019, 04:29 PM

Thanks everyone. Last thing to find is a column that isn't $350..

Posted by: Mark Henry Jan 11 2019, 04:54 PM

QUOTE(mb911 @ Jan 11 2019, 05:29 PM) *

Thanks everyone. Last thing to find is a column that isn't $350..

Last thing I need is the wiring harnesses for the switches and the ambition to do the deed. rolleyes.gif

Posted by: mb911 Jan 13 2019, 05:15 PM

Found a column on pelican for $95.. Yeah.

Posted by: 914forme Jan 19 2019, 01:39 PM

I need the harness connectors to the car. confused24.gif

Posted by: Mark Henry Jan 19 2019, 02:38 PM

QUOTE(914forme @ Jan 19 2019, 02:39 PM) *

I need the harness connectors to the car. confused24.gif


Just looked at what I have and the turn and wiper switches do have harnesses, but are the connector plugs the same as on the 914?

I don't have the harness for the ignition switch.

Posted by: mb911 Jan 19 2019, 03:21 PM

QUOTE(Mark Henry @ Jan 19 2019, 12:38 PM) *

QUOTE(914forme @ Jan 19 2019, 02:39 PM) *

I need the harness connectors to the car. confused24.gif


Just looked at what I have and the turn and wiper switches do have harnesses, but are the connector plugs the same as on the 914?

I don't have the harness for the ignition switch.



Nope I am not sure how I want to tackle that yet.. The plugs are very different.

Posted by: 914forme Jan 19 2019, 03:49 PM

yes my version is round, not the areal version. I will most likely go with Deutsch connectors, it is already not a stock anything car so it should not be an issue. Just documentation of what goes into what ever pin.

Still interested in the conversion, and Ben's final version.

Posted by: mb911 Jan 19 2019, 04:12 PM

For reference here are the 3 column s far left is 74 up 911 column middle is a 914 and far right is 69-73 911 column. Attached Image

Posted by: Lucky9146 Jan 19 2019, 05:32 PM

Excellent thread as I hope to one day do this. Thanks!
Wish I had done it when I had the chance but there was so much going on and I had a major wiring mess to contend with.
driving.gif white914.jpg

Posted by: mb911 Jan 22 2019, 11:22 AM

Here is the conversion for those interestedAttached Image Attached ImageAttached Image

Posted by: GeorgeRud Jan 22 2019, 12:57 PM

I’m starting to think there’s nothing you can’t fabricate! Great work!

Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)