Mods- please move to appropriate forum as needed- thanks!
I have parts that would be a very good start for a 914-6 or GT clone.
About 30 years ago I dismantled a Euro 914-6 that was beyond repair. Removed everything specific to the 6 installation that I could think of- I cut the engine/body mount bracket with a section of the firewall, the rear tail panel where the gold "914-6 VW Porsche" insignia was, and the little oil tank line support bracket. I have:
Body mount etc as described above
Engine mount bracket with motor mount and captured nut
Gold "914-6 VW Porsche insignia"
Dash with wiring harness and relay panel
Instrument/Gauge insert with gauges
Key switch with door latches and trunk release keyed same
Steering column with vintage aftermarket (MOMO???) steering wheel
Oil Tank with filter mount
Engine oil cooler with lines
4 corner Bilstein struts
Rear hubs/discs
914-6 GT style engine hatch (non-factory homemade)
Racing Seat (Scheel???)
Shifter
Euro tail light assys
2 doors and roof
I hope to take pictures of all this in the next day or 2, and would like input as to what the possible value of the above parts would be- and am interested in selling the entire lot at once. I have other misc parts from the car that I can add in a more detailed list. Thanks!
Ronnie
PM sent...
Hello Ronnie,
Welcome to 914World! You will be able get a better selling price if you sell the components individually, but it will also take longer, if you have the time.
Pictures will help tremendously, as the value of many of theses components are directly related to condition.
If you decide to break it up, I am interested in the seats and rear hub assemblies.
Look forward to seeing the pictures!
Thanks!
PM sent
I wonder if that sterling column would like to live here?
Attached image(s)
Guys here won't tell you what it's worth.
Best is to search the classifieds here, pelicanparts, etc and see what others were asking for similar parts.
I heve read all the PMs- I am pulling the parts from storage and cleaning them for pictures.
rgalla9146 I will call tomorrow night.
Thanks everyone for the replies!
Ronnie
I'm a buyer for the seats and possibly more. P.M. sent.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)