Printable Version of Topic
Click here to view this topic in its original format
914World.com _ 914World Garage _ Size/ Dimensions of oe 914-6 front engine mount bolt?
Posted by: TRE Cup Jan 21 2019, 02:14 PM
Hi
Misplaced mine , on oe 914/6 and now needing the dimensions, of this hex head bolt. AA can't seem to ship me one after ordering over a month ago.
Posted by: mb911 Jan 21 2019, 02:30 PM
Dave I will have to go check mine.
Posted by: rick 918-S Jan 21 2019, 02:33 PM
Send a pm to socalandy. He needed one and had to purchase a box of them. I am sure he has some left. I got one from him.
Posted by: aturboman Jan 21 2019, 02:42 PM
I also had to replace one recently; as I recall its a M12 x 1.5 x 135mm with a 19mm head.
Its an odd size and I had to special order it from a specialty hardware supplier; Porsche says NLA.
Must be 10.9 Grade too
Posted by: johnlush Jan 21 2019, 03:00 PM
Yep. Mine is sitting here and matches aturboman's description.
Posted by: dr914@autoatlanta.com Jan 21 2019, 03:37 PM
we have plenty on the shelf,
Hi
Misplaced mine , on oe 914/6 and now needing the dimensions, of this hex head bolt. AA can't seem to ship me one after ordering over a month ago.
Posted by: dr914@autoatlanta.com Jan 21 2019, 03:41 PM
ok found it we were holding the order for the German chicken wire to make the GT grill your order is going out today,
Posted by: dr914@autoatlanta.com Jan 21 2019, 03:43 PM
you know it HAS TO BE special hardness
I also had to replace one recently; as I recall its a M12 x 1.5 x 135mm with a 19mm head.
Its an odd size and I had to special order it from a specialty hardware supplier; Porsche says NLA.
Must be 10.9 Grade too
Posted by: mb911 Jan 21 2019, 07:32 PM
you know it HAS TO BE special hardness
I also had to replace one recently; as I recall its a M12 x 1.5 x 135mm with a 19mm head.
Its an odd size and I had to special order it from a specialty hardware supplier; Porsche says NLA.
Must be 10.9 Grade too
George he references grade 10.9 which is equal to SAE grade 8..
Posted by: sixnotfour Jan 21 2019, 07:44 PM
http://www.914world.com/bbs2/index.php?showtopic=101062&st=940#
Attached image(s)
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)