Printable Version of Topic

Click here to view this topic in its original format

914World.com _ 914World Garage _ Unidentified bits

Posted by: Stoddy Feb 11 2019, 02:04 PM

Hi Ho,

Any idea what these plasticy pieces are? The small round one is like a cap, possibly off the battery?
Attached Image

Posted by: GregAmy Feb 11 2019, 02:12 PM

The long pieces go around the inside edges of large holes, to stop wire chafing against the sheet metal.

The round piece looks like it may be another hole-protection plug.

Got nuthin' on the rectangular piece.

Posted by: ConeDodger Feb 11 2019, 02:13 PM

Did it, or does it have an outomatic antenna that goes up and down when you turn on or off the radio?

Posted by: jvmarino Feb 11 2019, 02:13 PM

QUOTE(Stoddy @ Feb 11 2019, 03:04 PM) *

Hi Ho,

Any idea what these plasticy pieces are? The small round one is like a cap, possibly off the battery?
Attached Image



Pretty sure the long curled pieces are to fit on the edge of a circular cut-out in the sheet metal, to protect wires that pass through the opening. Not sure which opening these came from, but it should be obvious when you see the matching diameter hole.

Jim

Posted by: barefoot Feb 11 2019, 03:18 PM

The long curved pieces go in the front trunk where the wires for the front turn signals go up behind some bodywork

Posted by: bbrock Feb 11 2019, 03:21 PM

QUOTE(barefoot @ Feb 11 2019, 02:18 PM) *

The long curved pieces go in the front trunk where the wires for the front turn signals go up behind some bodywork

agree.gif Not a great photo, but here:

Attached Image

Posted by: Stoddy Feb 11 2019, 03:48 PM

I love this site!!!

Thanks guys, so helpful, it's like having a 914 Encyclopedia at my fingertips!

beerchug.gif

Posted by: rgalla9146 Feb 12 2019, 06:36 AM

The small round plug ?
Look for five more around here.
Early cars only.


Attached thumbnail(s)
Attached Image

Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)