Printable Version of Topic

Click here to view this topic in its original format

914World.com _ 914World Garage _ Fuchs valve stem

Posted by: wndsnd Feb 11 2019, 08:16 PM

I am looking for some metal valve stems.

Does anyone have a spare 15 X 6 Fuch and will measure the stem hole? It probably is standard with all sizes, I just do not know.

Thanks

Posted by: Spoke Feb 11 2019, 09:41 PM

I found a set at my local NAPA for Euromeister wheels on my 930.

https://www.napaonline.com/en/p/NTH90432

Attached Image

Posted by: wndsnd Feb 11 2019, 11:23 PM

Thank you. That is exactly what I am looking for.

John

Posted by: Mark Henry Feb 12 2019, 11:29 AM

Never have done the metal stems, but fuchs use the standard rubber stem. The thing I hate about metal caps is they can seize on the stem. Shouldn't be a issue on summer cars.

Rims and tires is one of the few imperial rule international standards still in use, so everything should fit.

Posted by: VegasRacer Feb 12 2019, 10:34 PM

Any good tire shop should have them in stock. I have never had an issue getting them put on my wheels.