Printable Version of Topic
Click here to view this topic in its original format
914World.com _ 914World Garage _ Identifiy these parts
Posted by: Cornerlot Feb 23 2019, 10:28 PM
These parts came in a box of 914 stuff. I’ve seen the little black plastic thing somewhere but can’t remember where, but the L-shaped brackets' / plates I don’t recognize. Can you tell me what either part is? 
Posted by: mark04usa Feb 23 2019, 10:49 PM
91142320503 clutch cable clevis for cable end at trans
91433153305 intermediate plate for rear suspension outboard mount.
Posted by: Blue6 Feb 23 2019, 10:52 PM
The L brackets are alignment shims for the rear susp. Sorry, don’t recognize the blk plastic thingy...
Posted by: pilothyer Feb 24 2019, 12:47 AM
The L brackets are alignment shims for the rear susp. Sorry, don’t recognize the blk plastic thingy...
The black plastic "thingy" is the piece that the clutch cable attaches to on the clutch fork.
Posted by: rgalla9146 Feb 24 2019, 07:29 AM
91142320503 clutch cable clevis for cable end at trans
91433153305 intermediate plate for rear suspension outboard mount.
Wow....even the part nos.
Posted by: Olympic 914 Feb 24 2019, 09:08 AM
Clutch cable end.
Looks similar but not it. 
Don't know what the black plastic part is but the clutch cable end is made of metal and shaped differently. I wouldn't use a plastic part there. You could end up stuck somewhere with no clutch
Although the DAPO did use a big wingnut instead of the correct part and it worked for a while. Glad I found that before it stuck me.
Posted by: bbrock Feb 24 2019, 10:20 AM
Clutch cable end.
Looks similar but not it.
Don't know what the black plastic part is but the clutch cable end is made of metal and shaped differently. I wouldn't use a plastic part there. You could end up stuck somewhere with no clutch
Although the DAPO did use a big wingnut instead of the correct part and it worked for a while. Glad I found that before it stuck me.
The original clutch trunions were black plastic like the part in question. That is definitely what that part is. Most have been replaced with metal because the plastic ones break and leave you stranded just like you predict. Ask me how I know...
Posted by: Cornerlot Feb 24 2019, 10:47 AM
Thanks everyone. Case closed!
Steve
Posted by: mepstein Feb 24 2019, 10:55 AM
Clutch cable end.
Looks similar but not it.
Don't know what the black plastic part is but the clutch cable end is made of metal and shaped differently. I wouldn't use a plastic part there. You could end up stuck somewhere with no clutch
Although the DAPO did use a big wingnut instead of the correct part and it worked for a while. Glad I found that before it stuck me.
The original clutch trunions were black plastic like the part in question. That is definitely what that part is. Most have been replaced with metal because the plastic ones break and leave you stranded just like you predict. Ask me how I know...
what a stupid place to use plastic.
Posted by: StarBear Feb 24 2019, 05:14 PM
REALLY impressed with you guys (and everyone in 914World). My wife doesn't believe me there are this many folks and posts. Amazing...
Posted by: Dave_Darling Feb 25 2019, 05:36 PM
The original clutch trunions were black plastic like the part in question. That is definitely what that part is. Most have been replaced with metal because the plastic ones break and leave you stranded just like you predict. Ask me how I know...
Absolutely!
The metal one is from a 911, not a 914. Notice that the plastic is longer than the metal trunnion; this is one of the reasons that you need a spacer on the cable when you use the metal trunnion.
--DD
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)