Help, I just refurbished my air box (1974 1.8) with new seals etc. After getting the air box assembled and back into it's place under fresh air vent (what a pain to get those two bolts to line up...)
I can't find the bolt that I had disconnected from the cable (see image #3) As usual I put it in a special place so I would not lose it....yea right.
I have gone thru the parts diagram available and I cannot find the bolt that has the small hole in it that allows the cable to go thru it and fasten with washer /nut. I have found the part# for the fastening clamp, but not for the bolt at the end of cable.
All the bolts I see available do not have the "eye" hole in it for the cable to go thru and tighten. It won't take a barrel nut in its place.
If no one comes on board with a replacement part try here: https://www.aircraftspruce.com/menus/ha/bolts.html
These are on ebay....
https://www.ebay.com/itm/LOT-OF-5-USED-GENUINE-PORSCHE-911-912E-930-914-914-6-AIR-BOX-CABLE-CLAMP-BOLTS/361218448480?fits=Model%3A914%7CMake%3APorsche&hash=item541a4c1c60:g:M4YAAOSwBLlU4pTF:sc:USPSFirstClass!10514!US!-1
and these are new at peilican. I believe it's part no. 901.211.683.00
https://www.pelicanparts.com/catalog/SuperCat/911M/POR_911M_VENTHT_pg3.htm
(clamping bolt)
it's a 911 part, but there's a lot of crossover. Maybe someone more knowledgable can confirm...
dont feel bad...
http://www.914world.com/bbs2/index.php?showtopic=329046&st=0&p=2609178&#entry2609178
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)