This grommet the factory designed to help hold the cable away from the tin. It has 2 internal ribs that I felt were critical to the design of this piece. Yes, you can put a generic grommet in the hole, but there are a few of us that have seen these wear, there is a reason the factory spent the extra money to male them this way.
I was looking in the parts catalog and couln't readily find the part number. Not sure if these were sold as part of the battery cable assembly or not.
Either way here are some basic pics that will give you the idea of what I'm describing here.
Just bump this thread for the discount code and as soon as we have it put together I'll PM you. You will be able to combine to save a a couple of bucks with the other GB that is currently going. Just need a few days to get good pics and make the listing.
Who's in?
Attached thumbnail(s)
Attached image(s)
I'll take one and include it w/my other order. Thanks!
Just hold off on ordering until I can get you the code for these. Scott has gotten so efficient in shipping we get most everything out same day now.
Also choose reg mail for best rate, Fedex has a higher base rate.
Thanks again,
Mark
Don’t know what size stock was but will a 2 awg cable fit? If so I want one please
I’m in!
Where in the engine bay do they go?
Bump.
for two, please
Speeeed Bump
I’m in for one also.
Mack
Me tooooo
I'm in for three.
3 for me pls!
I'll take two.
I'll take two. Mark
I’m in.
One for me please
Two Please
I am in. Thanks, Mark.
In for one
One for me please
Two please, and the oil pressure boot too
Two Please
I'm in for one as well as the oil pressure sender boot.
I'm in for four please.
bump for 1 please.
Two of these please, combined with two oil sender boots.
One of these please, combined with oil sender boot, for which I have received the code.
Thanks!
Two please, and the oil pressure boot too
I am in for 3 parts.
Bob B
:
One please to go with my oil pressure boot
I am in for four please.
I'll take one... not sure how this works though
sorry, actually 2
I’ll take two of these as well. I’m in on the oil sender grommet. Just need the code for this when it’s ready.
bump
I will take one (1).
Bump. In for 2
Gotta' have one.....bump!!
gg
I'm for a couple.
Thanks Jim
I’ll take 2
Bump for one.
I'LL take 2
Barefoot
I am in, why not.
Can anyone confirm if the alt/starter grommet is the same or not ?
The title says positive cable grommet, so I take it just 1 per car
Two for me.
I would like to get one please (and will put it with my other order at the same time)
thank you
brant
Put me down for however many a 914-6 (original) has. Engine is out now and wiring harness going back in. And if the answer is 'none', I'll crawl away and find something else to buy from you guys! Thanks.
Two please
Will your check out allow 2 different codes on one order? One for this and one for that ?
I'll take one.
Thanks,
Jsaum
I have not received my engine tin grommet code yet.....ready to order....thank you.
gg
I will be following up on the engine tin grommet codes for the stragglers on that GB. We will keep that open for another week or so. Blake is putting together the code and listing for me and I'll be following up in the morning. SO sorry not moving fast enough but I had not originally thought these would be ready to sell together, but almost ready to send out the codes for these.
I must have really confused myself on this. I'm one of the stragglers I guess... it's 'cause I got the code for the oil pressure sender grommet but have not ordered yet because I'm waiting for the code on this one
(one payment) ... do I have that wrong ?
Nothing your just waiting for me to get this in the system.
Thanks for your patience,
I just sent all that responded here both codes so you have both codes. Gonna keep this GB alive til the 16th. I have a few more item that should be ready towards the end of the month too!
-Mark
may have a small technical difficulty, working on it now.
Well,
This is the 1st time we ran a dual GB through this site. It was explained that once a GB was entered it would discount and another could be added and further discounted. I'm going to have to reach out to Blake to see what the trick is here or if we have to enable multiple codes in the back side. Sorry about that.
I'll post up in the morning,
Mark
Okay, I am ready to place my order, but have a question.
Is this grommet required in a single location (positive cable through rear vertical engine tin) or in three locations as indicated in an earlier post with photo?
I will take two.
bump
Update:
We found out yesterday that this site will only allow the use of one coupon code per cart.
To get around this we have made it so that the Oil Pressure Switch Boot group buy price will automatically apply if you have both the Oil Pressure Switch Boot and Positive Cable Grommet in your cart. You can then apply the Positive Cable code to get both group buy prices. Sorry for any confusion this causes.
Paid mine for both items and able to use both GB discount code.
Thanks again Mark!
Worked for me
Scott told me he would discount me in a day or so as two discount codes did not work.....shipped in 24 hours....gotta' love 914 Rubber!!
gg
Thanks,
Who’d think it would be this difficult, but yes the new system required some tweaks
Appreciate your patience all
I need to get in on this too.
Bump for 2 cable grommets
I will buy one too...
Got Mine along with the Oil pressure sensor boots......beautiful work I must say.
Do you have anything for the CHT Sensor ?
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)