were going to make a 914 trailer, to pull behing the 914,. to take the race tires to the track. This one was rusty so we practiced out cuts for the car beside this one. Thought that would be cool to have them looking the same, pan the floor,it would have lots of room
Attached image(s)
another pic..has anyone made a trailer?
Attached image(s)
I have....just did a Harbor freight rig. Doing a 914 ass ender seems kinda like....a lot of work.
ya it will be , but it will be worth it
how do you attach a trailer to a 914?
got a sketch?
OKEY DOKEY....make sure the wheels match the wheels on the 914, the paint is flawless and that the trunk latch works with a remote. That will just make my day....
easy realy, weld a 6/4 channel in each long. and bring into a (y) and hitch, the car has a 2x2 channel welded in the trunk, that the licence plate is on a plate with the male channel that slides into car and pinned. then you take the licence plate off and insert the hitch and pin it.
Drop the trunk floor down low and that could be lots of storage. then put a floor in where the engine goes and you have a mighty nice beer cooler..
Someone did a thread on towing with a 914 and the trailer hitch behind the licence plate. I liked the finish of the hitch.
:PERMAGRIN: Joe
Check this thread http://www.914world.com/bbs2/index.php?act=ST&f=2&t=18938&hl=trailer&st=0 I never got mine made, but I will some day
I know this has been talked about for a very long time. I sure wish someone would do it because it sounds like it would look so cool. I agree with the same color and same wheels and tires...this would be soooooo cool.
Great idea!
I've seen Vette guys do this same thing.
THAT HITCH ON THE BLUE 914 IS MURFF DOG,I HAVE AUTOX THAT CAR, SAME SETUP ,HE COMES INTO OUR SHOP
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)