Printable Version of Topic
Click here to view this topic in its original format
914World.com _ 914World Garage _ What's this tool for
Posted by: Highland May 21 2019, 06:10 PM
I bought this as part of a GB on this site thinking some day I'd be glad I had it if I ever did front suspension work.
I just finished taking everything apart except for the steering rack and tie rods. Is that what its for; if so what application?
Posted by: toolguy May 21 2019, 06:24 PM
the spanner end look like the ball joint retainer. the wrench may fit the tie rods
Posted by: jim_hoyland May 22 2019, 05:22 AM
I have one too; so far I’ve loaned it out 3x....
Posted by: Luke M May 22 2019, 05:45 AM
I bought this as part of a GB on this site thinking some day I'd be glad I had it if I ever did front suspension work.
I just finished taking everything apart except for the steering rack and tie rods. Is that what its for; if so what application?
It's a inner tie rod tool. One end if for the factory rod end the other which should be 32 mm is for the turbo tie rods.
Posted by: Highland May 28 2019, 02:34 PM
Ok. so I guess I should have removed the boot to see that the washer is notched for the tool as I discovered today.
So I worked on both tie rod ends today and couldn't get either one loose. Will I break something in the steering rack if I turn too hard? Any suggestion on how to get the tie rod ends loose from the steering rack?
Steering rack is still in the car. In difficult situations like this is it advised to remove the rack?
I assume its a right hand thread.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)