Printable Version of Topic

Click here to view this topic in its original format

914World.com _ 914World Garage _ injectors - how to disconnect?

Posted by: boiledcabbage Jun 25 2005, 12:06 PM

how do I disconnect them - just pull the plugs off - anything to worry about or just pull hard ? I don't want to damage them...thx for any advice

Posted by: ! Jun 25 2005, 12:09 PM

If you pull off the electrical connections they won't fire.....be careful as they are hard to find replacements and they are brittle from age and heat. Same with the rubberized boots that cover them.

Posted by: Cap'n Krusty Jun 25 2005, 12:10 PM

D-jet (1.7 and 2 litre) you just pull them out, taking care not to damage the rubber boots. L-jet (1.8) has little wire clips which should removed with a little pick tool before you unplug the connector. PITA. BTW. The Cap'n

Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)