Printable Version of Topic

Click here to view this topic in its original format

914World.com _ 914World Garage _ looking for conversion -6, parts list

Posted by: brant May 30 2019, 02:47 PM

There used to be a great thread on here with a pretty complete description and parts list to do a -6 conversion

It might even have been written by Brad ?

I ran 3 google searches and came up empty handed
does anyone know how to find it?
A young man local to me is contemplating doing a conversion and I'd love to give him some reference material to research so he has the whole picture

thanks
brant

Posted by: Mark Henry May 30 2019, 03:16 PM

JP gave me one years ago, I'll look on my old PC but it might be gone.
Prices he had on it would be quite out of date.

Posted by: dr914@autoatlanta.com May 30 2019, 03:18 PM

jim patrick patrick motorsports, please remember that doing it correctly is very very expensive and there are reasonable cars out there already converted


QUOTE(brant @ May 30 2019, 01:47 PM) *

There used to be a great thread on here with a pretty complete description and parts list to do a -6 conversion

It might even have been written by Brad ?

I ran 3 google searches and came up empty handed
does anyone know how to find it?
A young man local to me is contemplating doing a conversion and I'd love to give him some reference material to research so he has the whole picture

thanks
brant


Posted by: Mark Henry May 30 2019, 03:22 PM

Not JP's but one i found

https://docs.google.com/spreadsheets/d/1rYgfiZ8lKvbcQYI4jNS6lj9oGA7pjW5MrexPbqDoppQ/edit#gid=0

Here's a real good thread on just about every type of conversion...google is your friend smile.gif

http://www.914world.com/bbs2/index.php?showtopic=55721

This is pretty good for a /6 convertion

http://www.914world.com/bbs2/index.php?showtopic=322462&st=0

Posted by: brant May 30 2019, 03:45 PM

Thank you a ton!!

Posted by: mb911 May 30 2019, 08:06 PM

The majority of the parts needed are on my website and some on maddogsmotorsports.

Posted by: Maltese Falcon May 30 2019, 08:58 PM

I can set you up with your mandrel tube exhaust headers, 3 different o.d. diameters available/ and 15% discount for 914World members.
Marty at MSDSinc.

Posted by: mepstein May 30 2019, 08:58 PM

I just looked at the spreadsheet for a quick minute but I would double the low end - $7K, if you want realistic pricing. Mostly because it's very difficult to find a running six for less than $7K.

Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)