What are the factory fuel lines sizes on a 914-6, I can't find fuel section on PET 5
Had the orig. fuel pump serviced what to refresh the orig. lines.
Thanks
The weber barbs are 8mm, 5/16" fuel hose works.
Not sure on the pump, I have a conversion.
If you are talking tank to engine bay lines through tunnel, the SS lines provided by tangerine work fine, not sure of size. Not anything unusual.
Agree with Mark n hose type
Thanks!
I'm looking for factory replacement as the car is bone stock w 80K miles. Been in
my garage for over ten years. I want the original lines replaced. There is no need for
high pressure F.I. lines. Using a stock pump that was recently service. It is my understanding the supply line from the tank is larger than the output line and the return line. I can't find 914-6 fuel diagrams anywere. This car is not on PET 5 that I can find.
Thanks
914-6 Fuel Pump
(S) Suction ....fuel tank to fuel pump OD 10mm
(D) Discharge..fuel pump to carbs OD 8mm
® Return......fuel pump to fuel tank OD 8mm
Original Plastic Lines... small line (return) 8mm....large line (suction) 10mm
As mentioned the SS lines provided by tangerine are excellent.
I used them to replace the aging plastic in my original 914-6...perfect fit.
I purchased fuel hose here:
https://www.belmetric.com/metric-hoses-c-14/
you can get OEM type fuel braided or smooth that are Multi-Fuel Hose-Ethanol Approved
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)