Just like the title says:
- Can anyone tell me the transmission ground strap length? Is it more than 8 inches?
- Will Swepco Moly 101 work on the front wheel bearings?
9-1/4" is what I recall from memory.
Swepco 101 moly works just greatl
Greg W.
The ground strap I have measures 7 inches.
I think you could use shorter, but it may be a little harder to install. Not saying you can’t.
I started using Swepco 101 for wheel bearings some 25+ years ago and never had a problem.
I use it for CV as well and most anything else I need grease for.
Jim
My ground cable was made out of a piece of heavy 200amp welder cable with sealed crimped copper eyelets,its totally sealed then ,my old original on was all crusty and stiff I didn't want to use it.
Rule of thumb.... Or other reference. Ploob. Last. Last my man, last.
Been using it for years no issue.
For Ford moly is the only recommended grease for it's wheel bearings.
New strap I got from Stoddard is only 7" long, 6 1/2 between holes.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)